本文選題：切換閥 + 安全閥　； 參考：《石油化工設備》2016年06期

【摘要】：安全閥前加裝切換閥可滿足安全閥的在線備份要求,分析了相關標準對于安全閥前旋轉切換閥壓力損失的要求,對旋轉切換閥的流阻特性進行了理論分析。按照閥門設計手冊和ISO 4126-9標準中的計算方法計算旋轉切換閥的流阻系數,并與DN500mm旋轉切換閥樣閥的流阻系數試驗結果進行比較分析。結果表明,ISO 4126-9計算方法的計算結果與樣閥的試驗結果較為吻合,該計算方法作為一種流阻系數計算的快速有效簡化方法,可用于旋轉切換閥工程化應用中的結構設計與選型計算。
[Abstract]:The installation of switch valve in front of the safety valve can meet the online backup requirements of the safety valve. The pressure loss requirements of the rotary switch valve in front of the safety valve are analyzed and the flow resistance characteristics of the rotary switch valve are analyzed theoretically. According to the calculation method of valve design manual and ISO 4126-9 standard, the flow resistance coefficient of rotary switch valve is calculated and compared with that of DN500mm rotary switch valve. The results show that the calculation results of ISO 4126-9 are in good agreement with the test results of the sample valves. This method is used as a fast and effective simplified method for calculating the flow resistance coefficient. It can be used for structure design and type selection calculation in engineering application of rotary switch valve.
【作者單位】： 北京航天動力研究所;
【分類號】：TH134

【相似文獻】

相關期刊論文 前4條

1 崔秀萍;;庫頂切換閥控制原理及實際應用中故障分析[J];科技傳播;2011年11期

2 靳忠卿;YJ－SF型三通切換閥的研究與應用[J];環境工程;1995年06期

3 陳衛華;朱文峰;王和力;;KL—15型制氧機切換閥故障的處理[J];通用機械;2008年05期

4 ;[J];;年期

，

本文編號：1806128