本文選題：雙圓環面　切入點：二次包絡環面蝸桿副　出處：《武漢科技大學》2011年碩士論文

【摘要】：本文建立了雙圓環面二次包絡環面蝸桿副(雙圓環面二包副)傳動嚙合分析的數學模型;結合嚙合原理、數值運算,分別得出了第一次和第二次嚙合過程中的嚙合函數、蝸桿螺旋面和蝸輪齒面方程、以及包括嚙合界限函數在內的一些列嚙合特性參數。通過算例,基本搞清楚了雙圓環面二次包絡環面蝸桿的嚙合特性,以及設計參數對嚙合質量的影響。結果顯示,雙圓環面二次包絡環面蝸桿傳動具備一系列優良的嚙合特性,例如,蝸輪齒面上存在寬闊的接觸區,較長的蝸桿雙線工作長度,尤其是雙圓環面二次包絡環面蝸桿能夠有效地避免根切和邊齒頂變尖。另外,平面產形砂輪、錐面產形砂輪、雙錐面產形砂輪及球面產形砂輪,都可看成是雙圓環面產形砂輪的特例。而且雙圓環面產形砂輪的可調參數較多,這為進一步改善雙圓環面二次包絡環面蝸桿的根切特性,提供了廣闊的空間。
[Abstract]:In this paper, the mathematical model of meshing analysis of double ring surface double enveloping worm gearing is established, and the meshing functions in the first and second meshing processes are obtained by combining the meshing principle and numerical calculation, respectively.The equations of worm helical surface and worm gear tooth surface, as well as some meshing characteristic parameters including meshing boundary function.The meshing characteristics of double ring double enveloping worm and the influence of design parameters on the meshing quality are studied by numerical examples.The results show that the double ring double enveloping worm drive has a series of excellent meshing characteristics. For example, there is a wide contact area on the tooth surface of the worm gear, and a long double line working length of the worm.Especially the double ring double enveloping worm can effectively avoid root cutting and edge tooth tip sharpening.In addition, the plane shaped grinding wheel, the cone shape producing wheel, the double cone shape producing wheel and the spherical producing shape grinding wheel can all be regarded as the special cases of the double ring surface producing grinding wheel.Moreover, there are many adjustable parameters of the grinding wheel with double ring surface, which provides a wide space for further improvement of the root tangent characteristics of the double ring surface double enveloping toroidal worm.
【學位授予單位】：武漢科技大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH132.44

【參考文獻】

相關期刊論文 前8條

1 王小林;胡來tb;;園環面型二次包絡環面蝸桿副的嚙合理論研究和參數選擇[J];焦作礦業學院學報;1988年Z1期

2 鄭州機械研究所分度蝸輪課題組;;精密傳動機構中包絡蝸桿傳動付的應用[J];齒輪;1978年04期

3 潘家冰;朱啟莊;;多頭環面蝸桿副的設計和制造[J];齒輪;1987年01期

4 董學朱;魏文軍;;真實齒面的描述和相嚙合齒面各點間隙的計算[J];機械傳動;1992年04期

5 殷李森;漸開線包絡環面蝸桿的磨削方法[J];機械傳動;2000年03期

6 趙亞平,段曉靜,魏文軍;計算誘導短程撓率的一種新方法[J];中國農業大學學報;2002年02期

7 趙亞平;;雙圓環面二次包絡環面蝸桿傳動的嚙合界線與蝸桿螺旋面的結構[J];武漢科技大學學報(自然科學版);2008年01期

8 殷李森;球面包絡弧面蝸桿傳動的初步探討[J];冶金設備;1983年01期

，

本文編號：1702529