本文選題：軸心軌跡　切入點：主動控制　出處：《機械設計與制造》2016年08期 　論文類型：期刊論文

【摘要】：為實現活塞橢圓銷孔加工的新方法,需要主軸軸心沿著期望的小橢圓軌跡運動。對一種液壓伺服回路系統進行深入研究,利用回路中的電液伺服閥來主動控制軸心的運動軌跡。首先建立主軸的動力學方程,并聯立雷諾方程、流量連續性方程及承載力公式,獲得了軸心運動坐標與電液伺服閥控制參數的定量關系。最后利用MATLAB軟件得到軸心運動軌跡為橢圓時,伺服閥的控制參數及靜壓油腔的壓力參數,這為活塞橢圓銷孔精密加工新方法的后續實現奠定了理論基礎。
[Abstract]:In order to realize the new machining method of piston elliptic pin hole, it is necessary for the spindle axis to move along the desired small elliptical trajectory. A kind of hydraulic servo loop system is deeply studied. The electro-hydraulic servo valve in the loop is used to actively control the motion trajectory of the axis. Firstly, the dynamic equations of the spindle, the parallel vertical Reynolds equation, the flow continuity equation and the bearing capacity formula are established. The quantitative relationship between the axis motion coordinate and the control parameters of the electro-hydraulic servo valve is obtained. Finally, the control parameters of the servo valve and the pressure parameters of the hydrostatic oil chamber are obtained by using MATLAB software when the axis motion track is elliptical. This lays a theoretical foundation for the following realization of the new precision machining method for piston elliptical pin holes.
【作者單位】： 青島理工大學機械工程學院;山東大學機械工程學院;山東大學機械工程學院高效潔凈機械制造教育部重點實驗室;
【基金】：國家自然科學基金項目(51505245);國家自然科學基金項目(51375275);國家自然科學基金項目(51205219)
【分類號】：TG52;TH137.9
，

本文編號：1604053