本文選題：圓弧齒輪泵　切入點：流量特性　出處：《寧夏大學》2013年碩士論文　論文類型：學位論文

【摘要】：齒輪泵具有結構簡單、體積小、重量輕、自吸性能好、對油液污染不敏感、工作可靠、壽命長、成本低和維修方便等眾多優點,故在各種液壓機械中得到了廣泛應用。本文對漸開線齒輪泵、內嚙合擺線泵等常見齒輪泵進行了系統研究,對常見齒輪泵的工作機理進行了分析,明確了其優缺點,并對常見齒輪泵的困油現象、徑向不平衡力、間隙泄漏等問題進行了分析。 齒輪作為齒輪泵的核心,通過對圓弧齒輪的研究,首次提出了四圓弧齒廓齒輪泵的設計思想,并以泵的最小體積為目標函數,泵的排量,極限速度,齒輪嚙合徑向間隙等為約束條件,模數、齒數、齒寬為設計變量建立了四圓弧齒廓齒輪泵優化設計數學模型,對其基本參數進行優化設計,解決該類泵的基本參數選擇問題；將這些參數與漸開線齒輪泵、普通擺線泵的參數進行比較。對四圓弧齒廓齒輪泵排量、理論流量、瞬時流量、平均流量、流量脈動、壓力脈動等特性進行求解分析,并與常見的漸開線齒輪泵的相關參數進行對比,提出了相關的改進措施。最后通過SolidWorks對四圓弧齒輪泵零件進行設計,并建立四圓弧齒輪泵三維模型。 本文對四圓弧齒廓齒輪泵進行了系統的研究,解決該類泵的基本參數選擇問題,并建立三維模型,將對圓弧齒廓齒輪泵以后的研究具有一定的理論指導作用。
[Abstract]:Gear pump has many advantages, such as simple structure, small volume, light weight, good self-priming performance, insensitive to oil pollution, reliable operation, long life, low cost and convenient maintenance. In this paper, the involute gear pump, inner meshing cycloid pump and other common gear pumps are studied systematically, the working mechanism of common gear pumps is analyzed, and its advantages and disadvantages are clarified. The problems of oil trap, radial imbalance and clearance leakage of gear pump are analyzed. Gear as the core of gear pump, through the research of circular gear, the design idea of four-arc tooth profile gear pump is put forward for the first time. Taking the minimum volume of pump as the objective function, the displacement and limit speed of the pump are obtained. The optimal design mathematical model of four-arc tooth profile gear pump is established based on the design variables of gear meshing radial clearance, modulus, tooth number and tooth width, and the basic parameters are optimized to solve the problem of selecting the basic parameters of this kind of pump. These parameters are compared with those of involute gear pump and common cycloid pump. The characteristics of displacement, theoretical flow, instantaneous flow rate, average flow rate, flow pulsation and pressure pulsation of four-arc tooth profile gear pump are solved and analyzed. Compared with the common involute gear pump, the relative improvement measures are put forward. Finally, the four-arc gear pump parts are designed by SolidWorks, and the three-dimensional model of the four-arc gear pump is established. In this paper, a systematic study on four-arc tooth profile gear pump is carried out to solve the problem of selecting the basic parameters of this kind of pump and to establish a three-dimensional model, which will have a certain theoretical guidance for the future research of circular arc tooth profile gear pump.
【學位授予單位】：寧夏大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TH325

【參考文獻】

相關期刊論文 前10條

1 張有忱,黎鏡中;圓弧齒輪泵傳動平穩性的研究[J];北京化工大學學報(自然科學版);2004年05期

2 陳志岳;;內嚙合圓弧的泛擺線齒輪泵設計[J];長沙水電師院學報(自然科學版);1990年02期

3 毛增光,舒正平;油泵用擺線內外轉子的開發[J];粉末冶金技術;2001年05期

4 馬生榮,劉振華;油泵內轉子的外形曲線與計算機輔助設計[J];粉末冶金技術;2003年05期

5 卞學良;擺線泵和擺線馬達齒形參數優化設計[J];河北工學院學報;1995年04期

6 王浩孚;;擺線副齒腔困油的計算方法[J];機床與液壓;1992年02期

7 范明豪,楊華勇,許賢良,欒振輝;復合齒輪泵流量特性及計算機仿真[J];機床與液壓;2000年06期

8 陳博,王平軍,胡金山;基于遺傳算法的齒輪泵結構優化設計[J];機床與液壓;2004年12期

9 董信根;加工直齒共軛內齒圈的插齒刀齒形分析與設計[J];機械設計與研究;1991年02期

10 甘學輝,吳曉鈴,侯東海;液壓齒輪泵的性能研究[J];機械設計與制造;2001年03期

，

本文編號：1586070