本文選題：液壓缸　切入點：試驗臺　出處：《沈陽工業大學》2012年碩士論文　論文類型：學位論文

【摘要】：液壓缸是一種能量轉換的液壓執行元件,它能將液壓能轉變?yōu)橹本�運動的機械功,因而是液壓系統中的執行器。隨著我國科學技術的不斷發展,液壓缸在液壓傳動與控制中的應用也越來越廣泛,液壓缸的功用被不斷地開發并利用。而與此同時,用戶對于液壓缸性能的要求也越來越高,而當前我國的液壓缸檢測設備與方法嚴重制約了液壓缸生產技術的提高,因?yàn)楦倪M(jìn)與提高當前的液壓缸檢測設備與方法,推出一款新型的液壓缸型式試驗臺成為急需解決的問題。 論文首先在查閱了大量國內外資料的基礎上,綜述了國內外液壓缸試驗臺的發展現狀、試驗臺的研究意義以及國家標準規定的試驗項目等內容。其次,針對實際生產需要,本文介紹了液壓缸型式試驗臺的系統功能分析,結構分析,以及可實現自動智能控制的計算機控制系統。最后,文章對液壓缸型式試驗臺中采用的比例溢流閥壓力控制系統進行了加載特性分析,并對其壓力控制特性進行了研究。 本文論述的新型綜合性液壓缸型式試驗臺,能進行各規格液壓缸型式試驗和出廠試驗,并附加70MPa超高壓試驗。試驗臺最多可對六個液壓缸進行同步試驗,也可使常規、高溫、超高壓三種試驗同步進行。此外,試驗臺可實現遠程無級調壓,復合調速,比例加載,換向穩定,自動排油,無接觸式行程測量,油溫自動控制,系統試驗自動智能控制。從而試驗臺達到了全面提高液壓缸性能檢測的準確性、穩定性以及可靠性,降低了勞動強度,提高了生產效率,為液壓缸生產技術水平的提高提供了堅實的基礎,對液壓缸的生產與檢測具有重大的指導意義與現實意義。
[Abstract]:The hydraulic cylinder is a kind of hydraulic actuator with energy conversion, which can transform the hydraulic energy into the mechanical work of linear motion, so it is the actuator in the hydraulic system. With the development of science and technology in our country, The application of hydraulic cylinder in hydraulic transmission and control is more and more extensive, and the function of hydraulic cylinder is continuously developed and utilized. At the same time, the requirements of users for the performance of hydraulic cylinder are more and more high. At present, the equipment and methods of hydraulic cylinder detection in our country have seriously restricted the improvement of the production technology of hydraulic cylinders, because the current inspection equipment and methods for hydraulic cylinders have been improved and improved. The introduction of a new type of hydraulic cylinder type test bed has become an urgent problem. On the basis of consulting a large number of domestic and foreign data, this paper summarizes the development status of the hydraulic cylinder test-bed at home and abroad, the research significance of the test-bed and the test items stipulated by the national standard, etc. Secondly, it aims at the actual production needs. This paper introduces the system function analysis, structure analysis and computer control system which can realize automatic intelligent control of hydraulic cylinder type test bed. In this paper, the pressure control system of proportional relief valve used in hydraulic cylinder type test table is analyzed and its pressure control characteristics are studied. The new comprehensive hydraulic cylinder type test bench described in this paper can carry out hydraulic cylinder type tests and factory tests of various specifications, with the addition of 70MPa ultra-high pressure test. The test bench can simultaneously test six hydraulic cylinders at most, and can also make routine and high temperature test. In addition, the test bench can realize remote stepless voltage regulation, compound speed regulation, proportional loading, commutation stability, automatic oil discharge, non-contact stroke measurement, oil temperature automatic control, The automatic intelligent control of system test can improve the accuracy, stability and reliability of hydraulic cylinder performance detection, reduce labor intensity and improve production efficiency. It provides a solid foundation for improving the production technology level of hydraulic cylinder and has great guiding and practical significance for the production and detection of hydraulic cylinder.
【學位授予單位】：沈陽工業大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH137.51

【引證文獻】

相關碩士學位論文 前1條

1 王連;液壓閥型式試驗臺控制特性的研究[D];沈陽工業大學;2013年

，

本文編號：1561569