本文關鍵詞： 成組技術 CAPP OPITZ編碼系統 相似度評價 ELECTREⅢ方法　出處：《南京理工大學》2012年碩士論文　論文類型：學位論文

【摘要】：隨著科學技術的飛速發展,企業的經營環境已經發生了巨大的變化。傳統的運作方式已不能滿足市場的需求,企業面臨著嚴峻的挑戰。因此,企業必須運用信息化技術來增強自己的競爭力。 本文研究了計算機輔助工藝過程設計(Computer Aided Process Planning,CAPP)和成組技術的理論知識以及應用成果,發現機械制造企業應用這兩種技術降低成本、提高工藝設計效率有顯著的成效。因此,本文將兩者相結合,以成組技術為基礎,利用零件的相似性原理進行計算機輔助工藝設計。 本文根據迪威爾(DVR)企業機加工車間對于CAPP系統的實際需求,以成組技術為基礎,結合編碼技術,搭建了符合企業需求的CAPP系統平臺。其主要的研究內容如下：(1)采用OPITZ編碼系統對零件編碼,建立零件組相似特征矩陣,利用編碼法和相似度評價判斷零件組。(2)建立實例工藝庫,對于多條工藝路線采用ELECTREⅢ方法進行多工藝路線的擇優選擇。(3)建立典型工藝庫,根據零件編碼調用相應零件組的典型工藝,進行修改后完成新工藝。(4)建立工藝資源庫,根據工藝資源人機交互地完成新工藝。通過以上的研究工作,構建了DVR機加工車間的CAPP系統,提高了工藝設計的效率。
[Abstract]:With the rapid development of science and technology, the business environment of enterprises has undergone tremendous changes. The traditional operation mode can no longer meet the needs of the market, and enterprises are facing severe challenges. Enterprises must use information technology to enhance their competitiveness. In this paper, the theoretical knowledge and application results of computer Aided Process planning (CAPP) and group technology are studied. It is found that the application of these two technologies in mechanical manufacturing enterprises can reduce the cost and improve the efficiency of process planning. In this paper, the computer aided process planning is carried out based on group technology and the similarity principle of parts. According to the actual demand for CAPP system in the machining workshop of Dewey, this paper is based on group technology and combined with coding technology. The main research contents of this platform are as follows: 1) using OPITZ coding system to encode parts, set up the similarity characteristic matrix of parts group, and use coding method and similarity evaluation to judge part group. For many process routes, the ELECTRE 鈪，

本文編號：1494507