本文關鍵詞： 液壓馬達 試驗系統 Labview 神經網絡　出處：《南京航空航天大學》2013年碩士論文　論文類型：學位論文

【摘要】：傳統的液壓馬達試驗臺測試系統大多是針對通用工業液壓馬達或者工程機械上的液壓馬達而設計的，其面向的對象是高壓低速或者低壓高速液壓馬達，不能很好的滿足高壓高速液壓馬達性能測試需要。本課題針對某高壓高速液壓馬達的試驗需求，研制開發了液壓試驗臺及基于Labview的性能測試系統。該系統能夠在35MPa高壓，12000r/min高速下進行該型液壓馬達各項型式試驗項目和定期試驗項目。 本文在對國內外液壓測試技術和液壓馬達試驗臺現狀的調研分析的基礎上，首先，針對該型高壓高速液壓馬達的運行特點，即最高35MPa、12000r/min，正常21MPa、8800r/min的工作要求，對試驗系統進行了詳細分析，并在此基礎上對液壓系統和測試系統進行了總體設計。其次，詳細闡述了液壓系統的工作原理，包括油源和拖動部分、油溫控制部分、換向部分、加載部分等。然后設計了測試系統的硬件組成并開發了基于Labview試驗臺測試軟件系統。為了解決測試系統雙輸入雙輸出的控制穩定性問題、研究了基于神經網絡的自適應PID算法，優化了控制特性。 最后在本課題所開發的試驗臺上對該型液壓馬達進行了耐久試驗、長期循環試驗、脈沖試驗等性能測試項目。試驗驗證，該系統功能和各項技術指標達到了設計要求，滿足了工作需要。
[Abstract]:The traditional hydraulic motor test bench test system is mostly designed for general industrial hydraulic motor or hydraulic motor on construction machinery, and its target is high pressure low speed or low pressure high speed hydraulic motor. Can not meet the high pressure high speed hydraulic motor performance testing needs. This topic is aimed at a high pressure high speed hydraulic motor test requirements. The hydraulic test bench and the performance test system based on Labview are developed. The system can be used at 35MPa high pressure. All types of test items and periodic test items of this type hydraulic motor are carried out at high speed of 12000r / min. Based on the investigation and analysis of domestic and foreign hydraulic testing technology and hydraulic motor test bench, firstly, aiming at the operation characteristics of this type of high pressure and high speed hydraulic motor, that is, up to 35 MPA. A detailed analysis of the test system was made for 12000r / min, normal 21MPA / 8800rmin working requirements. On this basis, the hydraulic system and the test system are designed. Secondly, the working principle of the hydraulic system is described in detail, including the oil source and drag part, oil temperature control part, commutation part. Then the hardware structure of the test system is designed and the test software system based on Labview is developed. In order to solve the control stability problem of the test system with two inputs and two outputs. The adaptive PID algorithm based on neural network is studied, and the control characteristics are optimized. Finally, the durability test, long cycle test, pulse test and other performance tests of this type hydraulic motor are carried out on the test bench developed in this paper. The system functions and various technical specifications meet the design requirements and meet the needs of the work.
【學位授予單位】：南京航空航天大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TH137.51

【參考文獻】

相關期刊論文 前8條

1 劉鎮,姜學智,李東海;PID 控制器參數整定方法綜述[J];電力系統自動化;1997年08期

2 Shelley Gretlein;;LabVIEW 2011助力工程師提高工程設計效率[J];電子產品世界;2011年09期

3 萬麗榮,曾慶良;液壓馬達加載測試裝置的設計研究[J];機床與液壓;2003年06期

4 黎勉,羅勇武,查曉春,李定華;交流變頻調速在液壓系統中的應用[J];機床與液壓;1997年06期

5 王靜,譚建平;基于虛擬儀器的液壓CAT系統軟件設計與應用[J];機電一體化;2004年03期

6 王述彥;師宇;馮忠緒;;基于模糊PID控制器的控制方法研究[J];機械科學與技術;2011年01期

7 張志生;芮豐;;變頻調速功率回收液壓泵及馬達試驗系統分析與實現[J];流體傳動與控制;2008年01期

8 李光提;李汝莘;康景峰;;基于虛擬儀器技術的液壓泵試驗測控系統的研制[J];農業機械學報;2005年12期

，

本文編號：1474428