本文關鍵詞：低溫金屬熔融沉積成型工藝研究　出處：《機械設計與制造》2016年01期 　論文類型：期刊論文

  更多相關文章： 低溫金屬 熔融沉積成型 工藝參數 三維打印系統 PCB制版 金屬三維成型

【摘要】：根據熔融沉積成型(FDM)工藝制造原型高效快速,原材料適應性廣的特點,提出了以低溫金屬代替熱塑性材料實現原型制造的方法,探究以低溫金屬為材料的熔融沉積成型工藝特點和各工藝參數對沉積成型質量的影響,并在此基礎上開發了低溫金屬三維打印系統。實驗以Sn99.3Cu0.7金屬絲為材料,設計并實現了單層沉積和多層沉積實驗。實驗證明:通過優化低溫金屬三維打印系統運動參數,能夠得到質量較好的單層金屬線和三維金屬模型,驗證了低溫金屬熔融沉積成型工藝在PCB制版和金屬三維成型方面應用的可行性,并根據實驗結果提出了后續技術發展應重點解決的問題。
[Abstract]:According to the characteristics of high efficiency and wide adaptability of the prototype of melt deposition forming (FDM) process, a method of prototype manufacture using low temperature metal instead of thermoplastic material is put forward. The characteristics of melt deposition molding process with low temperature metal as materials and the influence of various process parameters on the quality of deposition molding were investigated. On this basis, a low temperature metal 3D printing system is developed. Sn99.3Cu0.7 wire is used as the material in the experiment. The experiments of monolayer deposition and multilayer deposition are designed and implemented. The experiment proves that the monolayer wire and 3D metal model with good quality can be obtained by optimizing the motion parameters of low temperature metal 3D printing system. The feasibility of application of low temperature metal melt deposition forming process in PCB plate making and three dimensional metal forming is verified. According to the experimental results, the problems that should be solved in the following technical development are put forward.
【作者單位】： 華中科技大學機械科學與工程學院;
【基金】：國家自然科學基金資助項目(61108043,51175204) 高等學校博士學科點專項科研基金資助項目(20120142130011)
【分類號】：TH16
【正文快照】： 1引言熔融沉積成型(FDM)是一種快速成型工藝,在1990年最先開始市場化應用。作為一種增材制造技術,FDM技術不需要昂貴的制造工具,制造成本低,并可向用戶提供精確的定制化產品[1]。FDM系統一般包括加熱噴頭、基板和其他輔助裝置。工作時熱塑性材料(ABS塑料絲[2])進入噴頭中熔融，

本文編號：1434434