本文關鍵詞：新型弧齒錐齒輪行星傳動的嚙合性能與試驗　出處：《河南科技大學》2011年碩士論文　論文類型：學位論文

  更多相關文章： 行星傳動 非正交 嚙合性能 傳動效率 齒輪箱

【摘要】：弧齒錐齒輪由于其重合度大、傳動平穩、承載能力高等特點,在交通、航空航天、航海、機床等現代機械傳動中得到了廣泛的應用。而行星齒輪傳動以其承載能力高、重量輕、體積小、傳動比大等優點近年來在工程機械領域得到了快速發展,在現代動力機械中幾乎具有不可替代的作用。本文結合弧齒錐齒輪的特點及行星齒輪傳動的原理,提出了一種新型弧齒錐齒輪行星傳動,并進行了較深入的理論探討與試驗研究。 本文綜合弧齒錐齒輪的嚙合特性和行星傳動的原理分析了弧齒錐齒輪行星傳動的原理和實現方法。推導了弧齒錐齒輪行星傳動的傳動比和傳動效率的計算公式,并結合實例進行了分析。對弧齒錐齒輪行星傳動的嚙合性能進行了分析。利用弧齒錐齒輪設計及分析軟件對弧齒錐齒輪的接觸區和傳動誤差進行了分析和預置設計;運用齒輪動力學理論,建立了弧齒錐齒輪行星傳動的動力學模型,利用Runge-Kutta方法對其進行了求解分析。借鑒傳統圓柱齒輪行星傳動的結構,根據弧齒錐齒輪的傳動特點及幾何特征,設計了非正交傳動比21.5、模數5mm的弧齒錐齒輪行星傳動齒輪箱。完成了齒輪箱的制造、安裝和調試。進行了弧齒錐齒輪行星傳動齒輪箱的運轉噪音和傳動效率的測試試驗。 經實驗驗證,齒輪箱測試系統運轉綜合噪聲在90dB以下,傳動效率不同的工況條件差別較大,其中較理想的情況下可達到57.3%。驗證了本文所提出的新型弧齒錐齒輪行星傳動的可行性,達到了預期目的。
[Abstract]:Spiral bevel gear due to the coincidence degree, smooth transmission, bearing characteristics, higher ability in transportation, aerospace, navigation, machine tools and other modern mechanical transmission has been widely used. The planetary gear transmission with its high bearing capacity, light weight, small volume, high transmission ratio and other advantages in recent years in Mechanical Engineering the field has been developing rapidly, almost play an irreplaceable role in modern power machinery. Based on the principle and characteristics of planetary gear transmission spiral bevel gear, put forward a new kind of spiral bevel gear planetary transmission, and discusses the theory and experimental research deeply.
The character of this comprehensive meshing principle of spiral bevel gear and planetary gear analysis principle and implementation method of the spiral bevel gear planetary transmission. The formula of the spiral bevel gear planetary transmission ratio and transmission efficiency, and combined with case analysis. The meshing performance of spiral bevel gear planetary transmission are analyzed. Using spiral bevel gear design and analysis software of the contact area of the spiral bevel gear and transmission error are analyzed and the use of preset design; gear dynamics theory, a dynamic model of a spiral bevel gear planetary transmission, has carried on the analysis using the Runge-Kutta method. From the structure of the traditional cylindrical gear planetary according to the characteristics of transmission, transmission and geometric characteristics of the spiral bevel gear, the design of non orthogonal transmission ratio 21.5, spiral bevel gear planetary gear box module 5mm. The gear box The test of the operation noise and transmission efficiency of the spiral bevel gear planetary gear box is carried out.
After experimental verification, the gear box test system integrated operation noise below 90dB, the transmission efficiency of different working conditions are different, the ideal circumstances can reach 57.3%. to verify the feasibility of the new spiral bevel gear planetary transmission is proposed in this paper, to achieve the desired purpose.

【學位授予單位】：河南科技大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH132.41

【引證文獻】

相關期刊論文 前3條

1 常巧紅;魏冰陽;劉華偉;尚懷國;武浩;;弧齒錐齒輪行星機構的傳動比與效率的計算[J];機械傳動;2012年11期

2 魏冰陽;周賀;陳金瑞;;一種弧齒錐齒輪行星傳動齒輪箱體的模態分析[J];河南科技大學學報(自然科學版);2013年01期

3 彭宗和;郭興星;魏冰陽;;弧齒錐齒輪在少齒差行星傳動中的應用分析[J];機械傳動;2013年02期

，

本文編號：1407502