本文關鍵詞：轉臺線布局分析與改善　出處：《吉林大學》2011年碩士論文　論文類型：學位論文

  更多相關文章： 滾軸傳送帶 移動小車 外協看板 臨時看板 工作臺

【摘要】：本文通過對某公司A分廠轉臺環行生產線的分析,發現了該生產線的諸多問題,從物流、信息流、人因三方面進行考慮,對該生產線進行了全面的改善。首先,利用滾軸傳送帶替代固定的存放臺以縮短搬運時間,利用移動小車配屬物流中心的模式替代了原有固定存放點,由裝配工自己去存放點拿取配件的模式,使得整個生產線的物流模式有了全方位的改善。其次,信息流的改善是配合物流的改善進行的,由于物流方式已經由以往的推動式變成了現在的拉動式,所以原有的信息傳遞方式必然無法滿足現有的需要,故引入看板管理的概念,對全線信息流實施改善。對人因方面進行了改善,改善的重點是在一分裝處進行,對操縱桿的分裝專門設計了工作臺,同時該工作臺也具有一定的通用性,可以在進行細節的改良后應用于其他的分裝處。整體的改善使得生產線的有效作業時間比重大幅提升,多余走動大幅減少,生產效率與產能得到大幅提升。
[Abstract]:Based on the analysis of a company's A factory production line of the circular table, we found many problems, the production line from the logistics, information flow, from three aspects to consider, on the production line to conduct a comprehensive improvement. First of all, the use of roller conveyor belt instead of fixed storage platform to shorten handling time, instead of the original fixed storage point using the mobile car attachment of logistics center mode, by the assembly to get parts of the storage mode, make the whole production line logistics mode with the all-round improvement. Secondly, the flow of information is to improve the complex flow improvement, because the logistics has been driven by the previous turn the pull now, so the original information transfer mode cannot meet the existing needs, so the concept of Kanban management is introduced, the implementation of the improvement of information flow across the board. From aspects of improvement, improvement The focus is on a separate office, the loading lever designed table, the table also has certain commonality and can be modified in detail after applied to other packaging. The overall improvement makes the effective operation time line than the major increase, the excess move significantly reduced the production efficiency, and production capacity has been greatly improved.

【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH186

【參考文獻】

相關期刊論文 前6條

1 郭伏,李森;作業測定技術應用中的問題研究[J];工業工程;2003年03期

2 劉正剛,姚冠新;設施布置設計的回顧、現狀與展望[J];江蘇理工大學學報(社會科學版);2001年01期

3 黃培軍;鑄造車間粉塵污染的防治[J];機械工人;2001年02期

4 黃元元;5S現場管理[J];企業改革與管理;2004年01期

5 計三有;鐘華;;物流中心規劃與設計中的問題探討[J];物流技術;2006年03期

6 蔣韻堅;;淺談5S管理在企業管理中的作用[J];教育儀器設備;2000年03期

，

本文編號：1390844