發布時間：2019-05-20 20:10

【摘要】：系統能夠?qū)崿F(xiàn)手寫繪圖板功能,當觸筆接觸覆銅板時,能夠通過顯示屏LCD12864顯示出觸筆所在的坐標位置、象限以及觸筆軌跡等信息。電路設計以單片機STC89C58為核心,基于惠斯通電橋原理,從覆銅板4個引腳分別引出4路信號,經儀表放大器INA128進行10 000倍差分放大進行PCB坐標定位,然后由TLC2543進行A/D轉換,在單片機中建立數據庫,用查表法在LCD12864液晶屏上進行顯示。實驗表明,所設計的手寫繪圖板系統能基本完成題目設計要求,并且有進一步開發與完善的空間。
[Abstract]:The system can realize the function of handwritten drawing board. When the touch pen touches the copper laminate, it can display the coordinate position, quadrant and touch pen track of the touch pen through the display screen LCD12864. The circuit design is based on the single chip microcomputer STC89C58. Based on the principle of Wheatstone bridge, four signals are derived from the four pins of the copper laminate, and the PCB coordinates are located by 10 000 times difference amplification through the instrument amplifier INA128, and then the A 鈮，

本文編號：2481925