【摘要】：服務器產品出現質量問題時,傳統的質量追蹤方法是通過各個環節的工作人員記錄的信息來查詢質量問題的原因,但是這種質量追蹤方法已無法滿足用戶、銷售者以及生產者對快速解決服務器質量問題的要求。 基于上述情況,本系統采用基于UHF RFID技術的服務器質量追蹤方法,重點研究了追溯系統信息采集、數據分析對比以及追溯功能界面三大環節的關鍵技術。論文的主要工作體現在以下幾個方面： (1)針對傳統手工檢測方式存在的差錯率高、無法快速查詢、追溯困難且無法透過服務器的外殼對元器件進行質量監控等問題,對服務器產品的追蹤系統進行了需求分析和項目規劃,提出了將質量追蹤和質量回溯結合的論點,利用UHF RFID技術合理的布置在服務器質量追蹤過程的重要節點,在這些節點設置RFID讀寫器并在讀寫器中寫入質量判定條件,從而實現了服務器整個生命周期信息實時、準確、全面的采集； (2)針對追溯結果快速判斷的要求,本系統根據追溯系統的功能對數據庫進行優化設計,使用MySQL建立了追溯數據庫和標準數據庫這兩個數據庫對采集到的數據進行分析,能快速進行追溯信息的數據處理和結果分析； (3)針對生產商對追溯系統的使用要求,考慮到需要友好的人際交互界面進行追溯結果查詢,在Eclipse開發環境里使用SWT工具箱對系統的應用界面和功能進行了設計分析,同時在界面上顯示追溯各個階段的信息和追溯的分析結果。 通過對系統的測試驗證,本系統可以實現對質量數據的全面采集和自動識別,實時準確的監控服務器整個生命周期流程中的質量信息,還能在出現質量問題的同時分析其原因以保證下一步的正常進行,具有一定的實用價值。
[Abstract]:When there is a quality problem in the server product, the traditional quality tracking method is the reason of querying the quality problem through the information recorded by the staff in each link, but this quality tracking method can no longer satisfy the users. Requirements of sellers and producers for quick resolution of server quality problems. Based on the above situation, this system adopts the method of server quality tracking based on UHF RFID technology, and focuses on the key technologies of information collection, data analysis and contrast, and tracing function interface of the traceability system. The main work of this paper is as follows: (1) aiming at the problems of high error rate of traditional manual detection, unable to query quickly, difficult to trace back, and unable to monitor the quality of components through the shell of server, etc. The requirement analysis and project planning of the server product tracking system are carried out, and the argument of combining quality tracking with quality backtracking is put forward, and the important node of the server quality tracking process is reasonably arranged by using UHF RFID technology. In these nodes, the RFID reader is set up and the quality judgment condition is written in the reader, which realizes the real-time, accurate and comprehensive collection of the whole life cycle information of the server. (2) according to the requirement of quick judgment of traceability result, the system optimizes the design of database according to the function of traceability system. Using MySQL to establish the traceability database and the standard database to analyze the collected data, the data processing and the result analysis of the traceability information can be carried out quickly. (3) in view of the manufacturer's request to the traceability system, considering the need for friendly interpersonal interface to query the traceability result, the application interface and function of the system are designed and analyzed by using SWT toolbox in Eclipse development environment. At the same time, the interface shows the information of each stage and the results of the traceability analysis. Through the test and verification of the system, the system can realize the overall collection and automatic identification of the quality data, and monitor the quality information in the whole life cycle process of the server in real time and accurately. It can also analyze the causes of quality problems to ensure the next step of normal operation, which has certain practical value.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP368.5;TP391.44

【參考文獻】

相關期刊論文 前10條

1 宋曉;龔光紅;李伯虎;;基于本體的仿真系統全生命周期管理[J];北京航空航天大學學報;2007年08期

2 孫棣華;銀國超;趙敏;宋瀟瀟;;基于RFID的生產線監控技術與應用[J];重慶工學院學報(自然科學版);2008年04期

3 李慶;;運用信息技術 架構數字物流[J];電腦知識與技術;2006年11期

4 陳荊花;王潔;;淺析手機二維碼在物聯網中的應用及發展[J];電信科學;2010年04期

5 亢軍賢;尚永平;李武社;;無線射頻識別技術與應用研究綜述[J];甘肅科技;2008年09期

6 朱亮;盧鵠;孟飚;范玉青;;產品生命周期管理的功能概述[J];航空制造技術;2006年06期

7 李玉梅;萬立;熊體凡;;產品全生命周期數據信息的域建模方法[J];計算機輔助設計與圖形學學報;2010年02期

8 李海峰,吳慧中;元模型驅動的產品生命周期管理系統的設計與實現[J];計算機集成制造系統;2005年07期

9 張曉東,李海峰,柯飛帆;產品全生命周期管理系統體系結構研究[J];中國制造業信息化;2003年08期

10 朱昌平;鄧靖璇;顧慧;王智;單鳴雷;;基于RFID技術的電池追蹤與回收系統設計與實踐[J];實驗技術與管理;2010年12期

相關博士學位論文 前1條

1 倪益華;基于本體的制造企業知識集成技術的研究[D];浙江大學;2005年

相關碩士學位論文 前2條

1 孫光付;RFID及其在物流配送中的應用[D];華中科技大學;2005年

2 羅風;RFID在供應鏈物流管理中的應用研究[D];西南交通大學;2009年

，

本文編號：2390334