發布時間：2019-06-03 08:25

【摘要】：采用化學鍍方法在TiZrNiCo合金顆粒表面包覆上0.4~2μm厚的Pd膜,并測得不同膜厚的Pd/TiZrNiCo試樣在混合氣體中的吸氫動力學。結果表明:Pd膜越薄,Pd/TiZrNiCo抗毒化性能及吸氫動力學性能越好,0.4μm厚Pd膜試樣的吸氫量為2μm厚Pd膜試樣的1.6倍。Pd/TiZrNiCo試樣吸放氫后粉化,引發Pd膜破裂導致吸氫速率減緩與基體粉化引發吸氫速率加快的兩種效果,吸氫量隨吸放氫次數的增加而出現波動性的上升回落。根據吸氫機理及毒化機理,提出并采用相應的動力學模型,并對TiZrNiCo吸純氫及Pd/TiZrNiCo吸氫動力學曲線進行了擬合。
[Abstract]:The Pd film with thickness of 0.4 ~ 2 渭 m was coated on the surface of TiZrNiCo alloy particles by chemical plating, and the hydrogen absorption kinetics of Pd/TiZrNiCo samples with different film thickness in mixed gas was measured. The results show that the thinner the Pd film is, the better the antitoxic properties and hydrogen absorption kinetics of Pd/TiZrNiCo are. The hydrogen absorption capacity of 0.4 渭 m thick Pd film sample is 1.6 times of that of 2 渭 m thick Pd film sample. PD / TiZrNiCo sample is powdered after hydrogen absorption and desorption. There are two effects: the slow down of hydrogen absorption rate caused by the rupture of Pd film and the acceleration of hydrogen absorption rate caused by matrix powderization. The hydrogen absorption rate fluctuates and decreases with the increase of hydrogen absorption and desorption times. According to the mechanism of hydrogen absorption and poisoning, the corresponding kinetic model was proposed and adopted, and the kinetic curves of pure hydrogen absorption by TiZrNiCo and hydrogen absorption by Pd/TiZrNiCo were fitted.
【作者單位】： 北京有色金屬研究總院能源材料與技術研究所;
【基金】：科技部國際熱核聚變(ITER)計劃專項(2010GB113003)
【分類號】：TG178

【參考文獻】

相關期刊論文 前4條

1 桑革;沈崇雨;張義濤;曹偉;朱永法;葉小球;孫穎;;鑭系合金表面鍍Pd工藝研究[J];表面技術;2006年05期

2 曾高峰;史蕾;徐恒泳;;用化學鍍法制備Pd/Ag膜時膜厚和組成的控制[J];催化學報;2009年12期

3 武治鋒;賀躍輝;江W，

本文編號：2491795