【摘要】：超聲導波無損檢測技術具有高效、快捷、靈敏等特點,應用前景廣泛。復雜結構的無損檢測方案,需要根據結構中超聲導波傳播特性分析結果進行優化選取。針對平行四邊形截面桿,采用同時滿足平行四邊形域基本方程及斜邊邊界條件的斜坐標系,建立了完整的平行四邊形桿的波動力學方程。采用分向半解析法,計算得到了平行四邊形桿中超聲導波的頻散曲線,并分別研究了斜坐標系角度、對角線之比和鄰邊邊長之比對縱向、扭轉模態頻散特性的影響規律。最后,通過導波激勵、接收實驗,驗證了計算所得結論的正確性。
[Abstract]:Ultrasonic guided wave nondestructive testing technology has the characteristics of high efficiency, rapidity and sensitivity, and has a wide application prospect. The nondestructive testing scheme of complex structure needs to be optimized according to the analysis results of ultrasonic guided wave propagation characteristics in the structure. For the parallelogram section rod, the complete wave dynamics equation of the parallel quadrangle bar is established by using the oblique coordinate system which satisfies the basic equation of the parallel quadrangle domain and the oblique boundary condition at the same time. The dispersion curves of ultrasonic guided waves in parallel quadrangle bars are calculated by using the split-direction semi-analytical method, and the effects of oblique coordinate system angle, diagonal ratio and adjacent edge length ratio on longitudinal and torsional modal dispersion characteristics are studied respectively. Finally, the correctness of the calculated results is verified by guided wave excitation and receiving experiments.
【作者單位】： 北京工業大學機械工程與應用電子技術學院;安徽理工大學理學院;
【基金】：國家自然科學基金(11132002)項目資助
【分類號】：TG115.285

【相似文獻】

相關期刊論文 前2條

1 李春志;晶體轉動分析[J];航空材料;1981年S1期

2 ;[J];;年期

，

本文編號：2490427