【摘要】：為實現軋線自動化系統離線調試和優化目的,開發了中厚板軋線模擬系統.應用面向對象技術進行模擬系統設計,將軋線劃分為設備對象、儀表對象和軋件對象.單體對象通過封裝的服務更新自身屬性,通過開放的公共屬性建立對象之間的關聯.基于過程控制系統平臺環境進行模擬系統開發,采用多線程結構滿足中厚板軋線多個工藝區域的模擬要求,以時間觸發器控制模擬時間步長,采用實際數據回放方法產生模擬系統的軋制工藝數據.模擬系統實現了從坯料上線開始到軋制結束生產過程的模擬,設計開發的中厚板軋線模擬系統已應用于實際工程項目,滿足了軋線自動化系統的離線調試要求.
[Abstract]:In order to realize off-line debugging and optimization of wire rolling automation system, a medium and heavy plate rolling simulation system is developed. The simulation system is designed by using object-oriented technology, and the rolling line is divided into equipment object, instrument object and rolling object. The single object updates its own properties through the encapsulated service, and establishes the association between the objects through the open public properties. Based on the platform environment of process control system, the simulation system is developed. The multi-thread structure is used to meet the simulation requirements of multiple process areas of medium and heavy plate rolling line, and the simulation time step is controlled by time flip-flop. The rolling process data of the simulation system are generated by the actual data playback method. The simulation system realizes the simulation from the beginning of billet to the end of rolling. The designed and developed medium and heavy plate rolling line simulation system has been applied to the actual engineering project, which meets the off-line debugging requirements of the rolling automation system.
【作者單位】： 軋制技術及連軋自動化國家重點實驗室(東北大學);
【基金】：中央高�；究蒲袠I(yè)務費資助(N120407007)
【分類號】：TG334.9

【參考文獻】

相關期刊論文 前6條

1 王正林;孫一康;彭開香;;帶鋼熱連軋AGC系統實時仿真[J];北京科技大學學報;2006年02期

2 ;Complete Mill Simulation of the Rolling Process of 1660 mm Hot Strip Continuous Mills[J];Journal of Materials Science & Technology;2004年06期

3 矯志杰;王君;何純玉;李勇;;中厚板生產線的全線跟蹤實現與應用[J];東北大學學報(自然科學版);2009年11期

4 董敏;周彬;;板帶軋機厚控系統三自由度建模與故障模擬[J];鋼鐵;2013年01期

5 曾r，

本文編號：2476401