發布時間：2019-04-08 12:20

【摘要】：通過測量硼鋼B1500HS淬火過程中板料和模具的溫度變化曲線,結合有限元分析及反傳熱模型獲得淬火過程中板料與模具間的界面熱交換系數(IHTC)與溫度的關系。結果表明:板料溫度從770℃下降到200℃,IHTC的變化范圍在1970~3960 W/(m2·K)之間。隨著板料溫度的降低,IHTC隨之降低,但由于材料在410℃時發生奧氏體向馬氏體的轉變,相變潛熱的釋放導致IHTC不連續的現象發生。與以距離模具形面下方1mm處作為淬火介質的環境溫度相比,以模具形面處作為淬火介質的環境溫度得到的IHTC分布規律同前者基本一致,但I(xiàn)HTC的數值較高。
[Abstract]:By measuring the temperature change curve of sheet metal and die during B1500HS quenching of boron steel, the relationship between interface heat exchange coefficient (IHTC) and temperature of sheet metal and die during quenching was obtained by combining finite element analysis and reverse heat transfer model. The results show that the temperature of sheet metal decreases from 770 鈩，

本文編號：2454567