鎳鋁青銅化學鍍鎳磷合金和性能
發布時間:2019-04-04 13:33
【摘要】:以船用銅合金鎳鋁青銅為基體,采用酸性化學鍍溶液體系制備鎳磷合金鍍層,對該鎳磷鍍層的界面結合情況及其強度、表面形貌、化學成分組成、硬度、耐海水腐蝕性能等進行了研究。結果顯示,鍍層為高磷非晶鍍層,組織均勻致密,無孔隙等明顯缺陷,界面結合強度高,同時硬度較高(646 HV),耐海水腐蝕性能明顯優化?梢姴捎没瘜W鍍鎳磷合金對鎳鋁青銅進行表面改性處理,可有效提高其綜合性能,保護基體材料,延長其在海水中的服役壽命。
[Abstract]:Ni-P alloy coating was prepared by acid electroless plating solution with copper alloy Ni-Al bronze as substrate. The interface bonding, strength, surface morphology, chemical composition and hardness of Ni-P coating were studied. The corrosion resistance of seawater was studied. The results show that the coating is a high-phosphorus amorphous coating with uniform and dense microstructure, no obvious defects such as pores, high interfacial bonding strength and high hardness (646 HV), and the corrosion resistance of seawater is obviously optimized. It can be seen that the surface modification of Ni-Al bronze by electroless plating Ni-P alloy can effectively improve its comprehensive properties, protect the matrix material and prolong its service life in seawater.
【作者單位】: 江蘇大學先進制造與現代裝備技術工程研究院;
【基金】:江蘇大學優秀學術青年骨干培養對象基金資助項目(1211110001) 校企產學研合作項目(1801110288)
【分類號】:TG174.4
本文編號:2453864
[Abstract]:Ni-P alloy coating was prepared by acid electroless plating solution with copper alloy Ni-Al bronze as substrate. The interface bonding, strength, surface morphology, chemical composition and hardness of Ni-P coating were studied. The corrosion resistance of seawater was studied. The results show that the coating is a high-phosphorus amorphous coating with uniform and dense microstructure, no obvious defects such as pores, high interfacial bonding strength and high hardness (646 HV), and the corrosion resistance of seawater is obviously optimized. It can be seen that the surface modification of Ni-Al bronze by electroless plating Ni-P alloy can effectively improve its comprehensive properties, protect the matrix material and prolong its service life in seawater.
【作者單位】: 江蘇大學先進制造與現代裝備技術工程研究院;
【基金】:江蘇大學優秀學術青年骨干培養對象基金資助項目(1211110001) 校企產學研合作項目(1801110288)
【分類號】:TG174.4
【相似文獻】
相關期刊論文 前10條
1 徐健,邢建東,李鏡銀;鎳鋁青銅的熔鑄工藝特點[J];材料開發與應用;2004年02期
2 宋德軍;胡光遠;盧海;胡偉民;;鎳鋁青銅合金的應用與研究現狀[J];材料導報;2007年S3期
3 張曉菲;彭成章;肖陽;朱金水;;鎳鋁青銅高溫變形的本構模型研究[J];熱加工工藝;2012年20期
4 孫揚善;;鎳鋁青銅的回火組織[J];金屬熱處理;1990年01期
5 史鑫;宋德軍;胡偉民;;新型鎳鋁青銅合金組織研究[J];熱加工工藝;2009年10期
6 張曉菲;彭成章;肖陽;朱金水;;退火對鎳鋁青銅合金組織和性能的影響[J];熱加工工藝;2012年18期
7 G、M、文斯頓;湯文新;;海洋環境用鎳鋁青銅鑄造合金的綜述[J];國外艦船技術(材料類);1985年04期
8 ;18%Cr系不銹鑄鋼在海水中的耐浸蝕性[J];特鋼技術;1994年03期
9 許曉靜;陳樹東;潘勵;魏建;侍國防;;鋯微合金化鑄態鎳鋁青銅的組織與性能[J];稀有金屬;2014年01期
10 許曉靜;陳樹東;楚滿軍;潘勵;魏建;侍國防;;鈧、鋯和鍶復合微合金化鑄態鎳鋁青銅的顯微組織與性能[J];中國有色金屬學報;2013年12期
相關碩士學位論文 前2條
1 都春燕;鎳鋁青銅合金的耐蝕性及表面處理的研究[D];江蘇科技大學;2014年
2 劉利濤;鎳鋁青銅構件的最優化補焊方法及其物相的快速EDS相分析[D];天津大學;2012年
,本文編號:2453864
本文鏈接:http://sikaile.net/kejilunwen/jinshugongy/2453864.html
最近更新
教材專著