【摘要】：對GW63K鎂合金進行不同工藝的T6熱處理。結果表明:固溶處理不但可以提高合金的強度,還能使其保持良好的塑性,而時效處理能使T4態GW63K合金的強度進一步提高,但會降低其伸長率。隨著T61、T62、T63和T64四種熱處理中固溶溫度從545℃降低到525℃,GW63K鎂合金的強度基本不變,而伸長率得到提高;固溶溫度繼續從525℃降低到515℃,GW63K鎂合金的強度開始下降,而伸長率繼續提高。對比后發現,T63態合金的力學性能完全滿足技術指標要求,為最佳熱處理工藝。
[Abstract]:T6 heat treatment of GW63K magnesium alloy was carried out by different processes. The results show that solid solution treatment can not only improve the strength of the alloy, but also maintain good plasticity, while aging treatment can further improve the strength of T4-state GW63K alloy, but reduce its elongation. With the decrease of solution temperature from 545 鈩，

本文編號：2449207