【摘要】：目前,板帶鋼的產量占所有鋼鐵生產的一半以上,軋鋼工藝中熱軋影響著最終帶鋼的質量,所以研究熱軋帶鋼的工藝流程仿真是非常有必要的,具有重要的研究意義和應用價值。本文以帶鋼生產控制工藝為仿真對象,并結合帶鋼生產工藝,設計出基于MVC框架的帶鋼軋制過程網絡仿真系統。同時以該系統為基礎,研究了軋制工藝的厚度分配、軋制力與力矩、摩擦系數與前滑值以及帶鋼溫度,闡述了相應的仿真流程和實現方法,設計了相應的仿真模塊：(1)厚度分配模塊,主要研究了帶鋼厚度在熱軋中的變化情況；(2)軋制力與力矩模塊,主要研究了帶鋼在熱軋中所應承受的軋制力與力矩的變化情況；(3)摩擦系數與前滑值模塊,主要研究了帶鋼在熱軋中摩擦系數與前滑值變化情況；(4)溫度變化模塊,主要研究了帶鋼因輻射、傳導、冷卻、變形和摩擦而導致溫度變化的情況。通過實際數據的輸入得到的仿真結果數據與實際的熱軋結果數據進行比較后,說明了該仿真系統對于實際的軋制生產具有一定的參考作用,證明該網絡仿真系統有著良好的可靠性。
[Abstract]:At present, the production of strip is more than half of all steel production, and hot rolling affects the quality of final strip in rolling process, so it is very necessary to study the process simulation of hot rolled strip. It has important research significance and application value. In this paper, the strip rolling process simulation system based on MVC frame is designed by taking the strip production control process as the simulation object and combining the strip steel production process. On the basis of the system, the thickness distribution, rolling force and torque, friction coefficient and forward slip value and strip temperature of rolling process are studied, and the corresponding simulation flow and realization method are described. The corresponding simulation modules are designed: (1) thickness distribution module, mainly studying the change of strip thickness in hot rolling; (2) Rolling force and moment module, the change of rolling force and torque that strip should bear in hot rolling is studied. (3) friction coefficient and forward slip value module, mainly studied the change of friction coefficient and forward slip value in hot rolling; (4) temperature change module, which mainly studies the temperature change caused by radiation, conduction, cooling, deformation and friction of strip steel. After comparing the simulation result data with the actual hot rolling result data, it is proved that the simulation system has a certain reference function for the actual rolling production. It is proved that the network simulation system has good reliability.
【學位授予單位】：昆明理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TG335.56

【參考文獻】

相關期刊論文 前2條

1 周旭東,劉香茹;熱連軋過程直接法動態仿真[J];河南科技大學學報(自然科學版);2003年02期

2 TANG De-lin;LIU Xiang-hua;LI Xiang-yu;PENG Liang-gui;;Permissible Minimum Thickness in Asymmetrical Cold Rolling[J];Journal of Iron and Steel Research(International);2013年11期

相關碩士學位論文 前4條

1 王安;雙機架軋機數學模型自適應控制研究[D];昆明理工大學;2005年

2 趙丕鳳;帶鋼精軋機組熱軋過程仿真研究[D];哈爾濱理工大學;2008年

3 涂艷豐;冷軋帶鋼溫度及軋輥溫度場模擬[D];東北大學　;2009年

4 佟萌;單機架冷軋機過程控制系統與軋制力預測研究[D];大連理工大學;2012年

，

本文編號：2315965