【摘要】：為了尋找一種環保、低溫不銹鋼著色新工藝,以鉬酸銨為主著色鹽,添加多種不同添加劑對不銹鋼進行著色,通過正交試驗優選著色工藝。通過控制著色時間,得到了金黃色、深紅色、綠色、深綠色、黑色等多種色彩的著色膜。采用X射線能譜儀(EDAX)和掃描電子顯微鏡(SEM)等分析了著色膜的表面形貌和元素組成;通過電化學測試方法和機械摩擦法研究了著色膜的耐腐蝕性和耐磨性,并分析其機理。結果表明:著色膜致密、色澤光亮、鮮艷,主要成分為Mo O2,不銹鋼著色后耐腐蝕性及耐磨性大幅提高;本工藝穩定、常溫可操作,具有很好的應用前景。
[Abstract]:In order to find a new process for coloring stainless steel at low temperature and environmental protection, ammonium molybdate was used as the main coloring salt, various additives were added to coloring the stainless steel, and the coloring process was optimized by orthogonal test. By controlling the coloring time, the coloring films of gold, deep red, green, dark green, black and so on are obtained. The surface morphology and elemental composition of the colored film were analyzed by X-ray energy spectrometer (EDAX) and scanning electron microscope (SEM), the corrosion resistance and wear resistance of the colored film were studied by electrochemical measurement and mechanical friction, and its mechanism was analyzed. The results show that the coloring film is compact, bright and bright, and the main component is Mo O _ 2. The corrosion resistance and wear resistance of stainless steel are greatly improved after coloring, and the process is stable and operable at room temperature, which has a good prospect of application.
【作者單位】： 湖北大學材料科學與工程學院;
【分類號】：TG177

【參考文獻】

相關期刊論文 前2條

1 程作慧;薛永強;段燕芳;張春婷;杜慧玲;張金桐;;活化對不銹鋼著色的影響[J];材料保護;2008年03期

2 張述林;李敏嬌;王曉波;羅垎;;不銹鋼環保型彩色工藝及其耐腐蝕性能[J];腐蝕與防護;2008年06期

【共引文獻】

相關期刊論文 前4條

1 程作慧;薛永強;湯芝平;;堅膜對不銹鋼著色膜性能的影響[J];材料保護;2010年06期

2 王海人;鄭恩秀;郭興蓬;石興陽;李文維;;微機監控系統在不銹鋼化學著色中的應用研究[J];材料工程;2010年12期

3 王海人;李艷;屈鈞娥;鄭恩秀;曹志勇;李文維;;電位標準判斷不銹鋼著色中化學活化前處理質量的研究[J];材料工程;2012年03期

4 胡俊利;滿瑞林;梁永煌;王s，

本文編號：2290402