發布時間：2018-10-12 18:08

【摘要】：為支持復雜產品裝配作業過程的優化與控制、降低建模復雜度,提出一種基于"作業—資源流圖"的裝配系統分析模型快速構建方法。該方法以裝配站為基本分析單元,首先依據裝配作業工序與資源的相互作用,建立面向裝配現場的工序作業流和資源供給流,實現作業邏輯的快速、直觀表述;采用離散事件和狀態的提取與表示方法,將作業邏輯模型自動轉化為具有離散事件分析能力的Petri網性能分析模型,并利用作業規則設定函數實現在制品和資源配置方案的完整表述。以飛機襟副翼裝配的"作業—資源流圖"為基礎,介紹了裝配生產率、資源利用率以及資源配置方案的分析與優化過程,驗證了方法的有效性。
[Abstract]:In order to support the optimization and control of the assembly process of complex products and reduce the complexity of modeling, a rapid construction method of assembly system analysis model based on "Activity-Resource flow Graph" is proposed. In this method, the assembly station is taken as the basic analysis unit. Firstly, according to the interaction between the assembly process and the resources, the process job flow and the resource supply flow are established to realize the fast and intuitionistic expression of the job logic. By using the method of extracting and representing discrete events and states, the job logic model is automatically transformed into the performance analysis model of Petri nets with discrete event analysis ability. And the job rule setting function is used to realize the complete representation of the WIP and resource allocation scheme. The analysis and optimization process of assembly productivity, resource utilization and resource allocation scheme are introduced based on the "Activity-Resource flow Graph" of aircraft flaperon assembly, and the validity of the method is verified.
【作者單位】： 西北工業大學現代設計與集成制造技術教育部重點實驗室;
【基金】：國家科技支撐計劃資助項目(2011BAF13B03) 國防基礎科研資助項目~~
【分類號】：TG95;TH186

【參考文獻】

相關期刊論文 前2條

1 姜浩;周燕;;一種離散隨機Petri網的性能計算和分析方法[J];東南大學學報(自然科學版);2007年06期

2 馬健萍;周新建;潘磊;;基于Delmia/QUEST的數字化裝配線仿真應用[J];華東交通大學學報;2006年02期

【共引文獻】

相關期刊論文 前10條

1 陳寧;劉煒;;船舶建造計劃可視化仿真方法的研究[J];交通節能與環保;2010年03期

2 陳寧;劉煒;;船舶建造計劃可視化仿真方法的研究[J];交通節能與環保;2011年01期

3 陸明明;蘇U，

本文編號：2267103