【摘要】：使用Gleeble-3500熱模擬試驗機研究了Q345R的奧氏體連續冷卻相變(CCT)行為,利用二輥可逆試驗軋機進行了系列控制軋制控制冷卻(TMCP)實驗,開發出了不銹鋼(316)/低碳鋼(Q345R)復合板。較合理的工藝為:在奧氏體再結晶區進行軋制,終軋溫度為1000~1050℃,總壓下量為75%,軋后以0.2~7℃/s的速率冷卻至450℃以下后空冷,隨冷卻速率的增加,Q345R鋼板的顯微組織從鐵素體(F)+珠光體(P)向鐵素體(F)+貝氏體(B)過渡,屈服強度范圍330~430MPa,抗拉強度范圍為535~595MPa,0℃的沖擊吸收功高于50J;復合板界面結合強度大于350MPa,抗彎性能合格。
[Abstract]:The austenite continuous cooling phase transformation (CCT) behavior of Q345R was studied by Gleeble-3500 thermal simulation machine. A series of controlled cooling (TMCP) experiments were carried out on a two-high reversible rolling mill. The stainless steel (316) / low carbon steel (Q345R) composite plate was developed. The reasonable process is as follows: rolling in the recrystallization zone of austenite, the final rolling temperature is 1000 ~ 1050 鈩，

本文編號：2244243