【摘要】：利用超音速火焰噴涂技術在DZ40M合金表面制備了Ni Co Cr Al Y粘結層,采用等離子噴涂技術在粘結層表面制備了陶瓷面層,并對整體熱障涂層進行了真空預氧化處理。通過高溫靜態氧化實驗研究了真空預氧化對熱障涂層的氧化行為的影響。結果表明:真空預處理可在MCr Al Y粘結層和陶瓷面層的界面處形成連續、致密的α-Al2O3層;在1050℃下氧化800h后,噴涂態涂層TGO中除α-Al2O3外,還生成了大量尖晶石氧化物,而預氧化涂層TGO則以α-Al2O3為主;預氧化處理有效抑制了涂層在高溫氧化過程中尖晶石氧化物的形成,從而降低了整體氧化膜的生長速率。
[Abstract]:The Ni Co Cr Al Y bonding layer was prepared on the surface of DZ40M alloy by supersonic flame spraying technology. The ceramic surface layer was prepared by plasma spraying technique. The thermal barrier coating was treated by vacuum preoxidation. The effect of vacuum preoxidation on the oxidation behavior of thermal barrier coatings was studied by static oxidation experiments at high temperature. The results show that a continuous and dense 偽 -Al _ 2O _ 3 layer can be formed at the interface between the MCr Al Y bonding layer and the ceramic surface layer by vacuum pretreatment, and a large number of spinel oxides are formed in the sprayed TGO coating after oxidation at 1050 鈩，

本文編號：2234469