發布時間：2018-09-01 10:26

【摘要】：利用動態塑性變形(DPD)和準靜態壓縮變形(QSC)技術對純鈦圓柱樣品進行對比壓縮試驗,研究了不同應變速率下純鈦形變孿晶和微結構演變。結果發現:2種變形方式的變形機制相似,低應變時以形變孿生為主,孿生飽和后轉變?yōu)槲诲e(cuò)滑移主導;高應變速率促進了形變孿晶的產生,激發{4211}壓縮孿晶的形成,同時使變形機制轉變臨界應變提前至0.2;純鈦在高應變速率和高應變(ε≥0.6)下出現絕熱剪切帶(ASB)。
[Abstract]:Dynamic plastic deformation (DPD) and quasi-static compression deformation (QSC) techniques were used to study the deformation twin and microstructure evolution of pure titanium at different strain rates. The results show that the deformation mechanism of the two deformation modes is similar, the twinning is dominated by deformation twinning at low strain, and the twinning changes to dislocation slip after saturation, and high strain rate promotes the formation of deformation twins and excites the formation of {4211} compression twins. At the same time, the critical strain of deformation mechanism transition was advanced to 0.2, and the adiabatic shear band (ASB). Appeared in pure titanium at high strain rate and high strain (蔚 鈮，

本文編號：2216911