【摘要】：對擠壓態Mg-6.2 mass%Er合金在靜態再結晶熱處理過程中組織、織構的演變以及相應的力學行為進行了表征,分析了影響該合金塑性變形的微觀機制。結果表明,擠壓態Mg-6.2 mass%Er合金為部分再結晶的形變組織。在熱處理過程中,再結晶程度與退火溫度有關,在500℃下退火熱處理獲得完全再結晶組織。隨著再結晶程度的提高,基面織構出現明顯的弱化。合金室溫拉伸塑性取決于織構的類型,基面織構的弱化導致合金室溫塑性大幅度提高。
[Abstract]:The microstructure, texture evolution and corresponding mechanical behavior of extruded Mg-6.2 mass%Er alloy during static recrystallization heat treatment were characterized, and the microcosmic mechanism affecting the plastic deformation of the alloy was analyzed. The results show that the extruded Mg-6.2 mass%Er alloy is partially recrystallized. During heat treatment, the recrystallization degree is related to the annealing temperature, and the recrystallization structure is obtained by annealing at 500 鈩，

本文編號：2170910