發布時間：2018-07-21 10:50

【摘要】：針對規格為φ139.70 mm鉆桿焊縫區進行橫向側彎試驗過程中出現試樣斷裂情況,通過對斷口掃描電鏡分析、焊縫區金相檢測,結合焊縫區的拉伸試驗、洛氏硬度和沖擊試驗等分析檢測手段,查找分析了產生不合格情況的原因。結果表明:因鉆桿接頭和管體端面殘留油污,致使鉆桿摩擦焊生產過程中在焊縫生成大量夾雜物,影響鉆桿焊縫區力學性能,導致橫向側彎試驗不合格。
[Abstract]:In view of the fracture of the specimen during lateral bending test in the weld zone of 蠁 139.70 mm drill pipe, the fracture was analyzed by SEM, metallographic examination of the weld zone and tensile test of the weld zone. Rockwell hardness and impact test and other means of analysis and analysis of the causes of nonconformities. The results show that a large amount of inclusions are formed in the weld during the production process of the drill pipe friction welding due to the residual oil pollution on the drill pipe joint and the end surface of the pipe, which affects the mechanical properties of the weld zone of the drill pipe and results in the failure of lateral bending test.
【作者單位】： 天津出入境檢驗檢疫局化礦金屬材料檢測中心;
【基金】：天津出入境檢驗檢疫局青年發展項目(TK061-2013)
【分類號】：TG441.7
，

本文編號：2135284