發布時間：2018-06-29 01:23

  本文選題：形狀記憶合金 + 驅動器�。� 參考：《北京航空航天大學學報》2015年04期

【摘要】：偏置彈簧參數對形狀記憶合金(SMA,Shape Memory Alloy)驅動器的輸出性能有著非常大的影響.為獲得其影響規律,通過試驗研究了不同偏置彈簧剛度以及不同彈簧預壓縮載荷下,SMA驅動器的作動位移、響應速度的變化規律以及循環次數對驅動器性能的影響規律.試驗結果表明,驅動器最大作動位移及響應速度隨彈簧剛度或預載的增大而降低;驅動器性能在前幾次循環中衰減較大,隨著循環進行性能逐漸趨于穩定;彈簧預載的增大使驅動器性能穩定所需的循環次數減少,而彈簧剛度對驅動器輸出性能的循環變化規律影響不大.
[Abstract]:The bias spring parameters have great influence on the output performance of shape memory Alloy driver. In order to obtain the influence law, the actuator displacement, response speed and the influence of cycle times on the performance of SMA actuator under different spring precompression loads and different offset spring stiffness were studied experimentally. The experimental results show that the maximum actuator displacement and response speed decrease with the increase of spring stiffness or preload, and the performance of the actuator attenuates greatly in the previous cycles, and tends to be stable with the cycle performance. The increase of spring preload reduces the number of cycles needed to stabilize the performance of the actuator, while the stiffness of the spring has little effect on the cyclic variation of the output performance of the actuator.
【作者單位】： 北京航空航天大學能源與動力工程學院;
【基金】：國家自然科學基金資助項目(11272025) 中央高�；究蒲袠I(yè)務費專項資金資助項目(YWF-14-RSC-014)
【分類號】：TG139.6;V423

【參考文獻】

相關期刊論文 前9條

1 閆曉軍;張小勇;聶景旭;張紹衛;;采用SMA驅動的小型空間磁懸浮飛輪鎖緊機構[J];北京航空航天大學學報;2011年02期

2 唐森;董二寶;許e，

本文編號：2080202