本文選題：軸承鋼 + 合金元素V　； 參考：《材料熱處理學報》2015年07期

【摘要】：通過掃描電子顯微鏡、透射電子顯微鏡、XRD技術、EBSD分析、動態相變規律研究以及力學性能測試,研究了不同熱處理工藝及合金元素V的加入對高碳鉻軸承鋼GCr15的顯微組織和性能的影響。結果表明,強碳化物形成元素V添加后,動態CCT曲線向右下方移動,抑制了二次碳化物的析出和珠光體轉變,Ms點降低;添加V后,淬回火處理和貝氏體等溫淬火處理后強度、硬度和沖擊韌性均有不同程度提高;通過添加合金元素V,可以消除淬回火處理過程中出現的淬火微裂紋,提高性能;V的添加還能降低熱處理后殘留奧氏體含量,提高工件尺寸穩定性;盡管,添加V會很小程度的抑制貝氏體轉變,考慮到V對性能的貢獻,綜合考慮認為,高碳鉻軸承鋼中添加V利大于弊。
[Abstract]:By means of scanning electron microscope, transmission electron microscope, XRD technique, EBSD analysis, dynamic phase transformation and mechanical properties test, The effects of different heat treatment processes and the addition of alloy element V on the microstructure and properties of high carbon chromium bearing steel GCr15 were studied. The results show that the dynamic CCT curve moves to the lower right after the addition of the strong carbides forming element V, which inhibits the precipitation of secondary carbides and the decrease of the pearlite transformation Ms points, and the strength after quenching and tempering treatment and bainite isothermal quenching after adding V, The hardness and impact toughness are improved in varying degrees, by adding alloy element V, the quenching microcracks occurring during quenching and tempering treatment can be eliminated, and the content of retained austenite after heat treatment can be reduced by increasing the properties and adding V. In view of the contribution of V to the properties, it is considered that the advantages of adding V to high carbon chromium bearing steel outweigh the disadvantages.
【作者單位】： 北京科技大學冶金工程研究院;
【基金】：國家高技術研究發展計劃“863”項目(2012AA03A508)
【分類號】：TG142.1

【參考文獻】

相關期刊論文 前4條

1 郭淑娟;王麗敏;;軋后控冷工藝對高碳鉻軸承鋼網狀碳化物的影響研究[J];價值工程;2012年01期

2 閆肅;宋慶功;;軋后水冷生產軸承鋼的實驗研究[J];熱加工工藝;2008年02期

3 夏偉棟;李錚;鄭雨e，

本文編號：1964912