本文選題：Al-Si合金 + Sb變質處理�。� 參考：《熱加工工藝》2015年23期

【摘要】：為了提高鋁合金性能,通過向基體Al-6%Si合金中添加Sb變質劑進行變質處理,研究了Sb變質劑對Al-Si鋁合金組織性能的影響。結果表明:在Al-6%Si合金中加入Sb變質劑后,可以使粗大的共晶Si由針片狀變成細小均勻分布的短條狀或粒狀,使α-Al枝晶分布均勻,合金的硬度及韌性得到提高。其最佳變質工藝為:變質溫度為740℃,變質時間為10 min,變質劑的加入量為0.2%。對于變質溫度、變質時間、變質劑的添加量來說,變質劑的添加量是影響變質效果的最大因素。
[Abstract]:In order to improve the properties of aluminum alloy, the effect of SB modifier on the microstructure and properties of Al-Si aluminum alloy was studied by adding SB modifier to the matrix Al-6%Si alloy. The results show that after adding SB modifier to Al-6%Si alloy, the coarse eutectic Si can be changed from needle shape to small strip or granular shape, 偽 -Al dendrite distribution is uniform, and the hardness and toughness of the alloy are improved. The optimum modification process is as follows: the metamorphic temperature is 740 鈩，

本文編號：1826209