本文選題：等徑角擠壓 + 細晶強化�。� 參考：《摩擦學學報》2015年01期

【摘要】：本文中系統研究了經等徑角擠壓(ECAE)處理后的Ti5553鈦合金在海砂環境中的沖蝕磨損機理演變歷程和失效原因.發現Ti5553鈦合金在高角度沖蝕工況下,其沖蝕磨損機理從初期的微切削轉變?yōu)闆_擊擠壓變形,并保持穩定;合金顯微組織中彌散的α相以及ECAE工藝影響了沖蝕機理演變過程及沖蝕磨損程度;提高合金的強度、韌塑性對于抵抗沖蝕磨損起到了促進作用.
[Abstract]:In this paper, the evolution process and failure cause of erosion wear mechanism of Ti5553 titanium alloy treated by equal diameter angle extrusion (ECAE) in sea sand environment were systematically studied. It was found that the erosion wear mechanism of Ti5553 titanium alloy changed from the initial micro cutting to the impact extrusion deformation and kept stable in the high angle erosion condition, and the microstructure of the alloy was stable. The diffusion of alpha phase and ECAE process influence the evolution process of erosion mechanism and the degree of erosion and wear, and improve the strength and toughness of the alloy to resist erosion and wear.

【作者單位】： 浙江海洋學院船舶與海洋工程學院;上海交通大學機械與動力工程學院;清華大學摩擦學國家重點實驗室;
【基金】：國家自然科學基金(51205359) 清華大學摩擦學國家重點實驗室開放基金(SKLTKF13A06)資助~~
【分類號】：TG379

【參考文獻】

相關期刊論文 前2條

1 郝，

本文編號：1779941