本文選題：碳化硅增強A鋁基復合材料 + 復合鑄造��； 參考：《Transactions of Nonferrous Metals Society of China》2015年08期

【摘要】：利用復合鑄造和振動斜板鑄造2種方法鑄造Si Cp增強A356復合材料,比較2種復合材料中碳化硅含量對材料顯微組織、孔隙、硬度和耐磨性的影響。在鑄態條件下,振動斜板鑄造和復合鑄造的2種復合材料的基體分別為球形和枝晶結構。振動斜板鑄造的復合材料其碳化硅顆粒分布更加均勻,并且具有更高的硬度,復合鑄造的材料則具有更少的孔隙。對于這2種復合材料,碳化硅顆粒的增加(體積分?jǐn)?shù)最大為20%)導致碳化硅顆粒在基體合金內更加均勻分布并且提高了其耐磨性。與復合鑄造材料相比,對于振動斜板鑄造的復合材料,碳化硅含量的增加,將降低球形顆粒的尺寸和形狀因子,并且具有較好的耐磨性。振動斜板鑄造材料比復合鑄造材料具有更好的力學性能,這是因?yàn)榛w中的碳化硅顆粒分布更加均勻,而且振動斜板鑄造過程中形成了球形組織。
[Abstract]:Sic p reinforced A356 composites were cast by means of composite casting and vibrating inclined plate casting. The effects of sic content on microstructure, porosity, hardness and wear resistance of the composites were compared.In the as-cast condition, the matrix of the two kinds of composites were spherical and dendritic respectively.The silicon carbide particles are distributed more evenly and have higher hardness, while the composite casting materials have less porosity.For these two composites, the increase of sic particles (up to 20 in volume fraction) leads to a more uniform distribution of sic particles in the matrix alloy and improves its wear resistance.Compared with composite casting materials, the increase of silicon carbide content in vibratory inclined plate casting composites will reduce the size and shape factor of spherical particles, and have better wear resistance.The mechanical properties of vibratory inclined plate casting material are better than that of composite casting material because the silicon carbide particles in the matrix are more uniform and the spherical structure is formed in the process of vibrating inclined plate casting.
【作者單位】： School
【分類號】：TB33;TG24

【參考文獻】

相關期刊論文 前8條

1 Behnam Rahimi;Hamed Khosravi;Mohsen Haddad-Sabzevar;;Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route[J];International Journal of Minerals Metallurgy and Materials;2015年01期

2 陳志鋼;陳振華;陳鼎;賀毅強;陳剛;;Microstructural evolution and its effects on mechanical properties of spray deposited SiC_p/8009Al composites during secondary processing[J];Transactions of Nonferrous Metals Society of China;2009年05期

3 宋e，

本文編號：1771094