本文選題：微細孔　切入點：陣列孔　出處：《沈陽工業大學學報》2015年06期

【摘要】：為了獲得大深徑比的微細陣列孔,以鋁作為基體金屬并采用鑄造法制備了微細陣列孔.根據預期陣列孔的結構,編排并固定預制體的孔芯.將預制體放置在自制金屬型中進行澆注,使熔融金屬鋁液圍繞于預制體的孔芯,待鋁液凝固后抽出孔芯得到微細陣列孔.利用激光共聚焦顯微鏡測量微細陣列孔的孔壁粗糙度,并計算微細陣列孔的形狀因子.結果表明,由鑄造法制備的微細陣列孔的分布十分規律密集,孔徑大小基本一致.微細陣列孔的形狀非常趨近于圓形,孔壁十分光滑,且深徑比很大.
[Abstract]:In order to obtain microarray holes with large aspect ratio, aluminum was used as matrix metal and microarray holes were prepared by casting method. Arrange and fix the pore core of the preform. Place the preform in a self-made metal mold for pouring, so that molten metal liquid aluminum surrounds the pore core of the preform, The microarray holes are obtained by pulling out the core after solidification. The roughness of the pore wall of the microarray holes is measured by laser confocal microscope and the shape factor of the microarray holes is calculated. The results show that, The distribution of microarray holes prepared by casting method is very regular and dense, and the pore size is basically the same. The shape of the microarray holes is very close to the circle, the hole wall is very smooth, and the aspect ratio is very large.
【作者單位】： 沈陽工業大學材料科學與工程學院;哈爾濱工業大學材料科學與工程學院;
【基金】：遼寧省教育廳重點實驗室基金資助項目(LZ2014012)
【分類號】：TG146.21

【相似文獻】

相關期刊論文 前1條

1 黃永逸;白基成;朱國征;李浩洲;;微噴部件陣列孔電火花加工工藝試驗研究[J];電加工與模具;2012年04期

相關會議論文 前1條

1 朱國征;黃永逸;盧有會;白基成;;去離子水工作液下微細陣列孔電火花加工工藝試驗研究[A];第14屆全國特種加工學術會議論文集[C];2011年

，

本文編號：1665348