本文選題：干涉檢測　切入點：包圍盒　出處：《計算機集成制造系統》2015年07期

【摘要】：鑒于現有裝配干涉檢測方法僅限于利用包圍盒排除不干涉的對象,提出軸向包圍盒和方向包圍盒的十字相交判斷方法,使得基于包圍盒即可檢測出零件在平移過程中產生的硬干涉關系,從而有效縮短檢測時間。利用基于擴展結構的層次包圍盒逐漸逼近且緊密包覆幾何模型、排除不可能干涉的零件并進行包圍盒十字相交判斷,可大幅度減少干涉檢測的運算量并提高算法效率�；诎鼑惺窒嘟慌袛嗯c層次包圍盒,提出面向零件平移的裝配干涉檢測算法和流程。在AeroAssem裝配設計系統中實現了該方法,通過在裝配干涉矩陣生成中的實例驗證分析,說明所提方法是有效的和精確的,可廣泛應用于裝配規劃與仿真等設計任務中。
[Abstract]:In view of the fact that the existing assembly interference detection methods are limited to excluding non-interference objects by using bounding boxes, a cross intersection judgment method for axial bounding boxes and directional bounding boxes is proposed. Based on bounding box, the hard interference relation of parts in the process of translation can be detected, and the detection time can be shortened effectively. The hierarchical bounding box based on extended structure is used to gradually approach and close-cladding the geometric model. Eliminating the parts that can't interfere and judging the cross intersection of bounding box can greatly reduce the computation amount of interference detection and improve the efficiency of algorithm. Based on the judgment of cross intersection of bounding box and hierarchical bounding box, This paper presents an assembly interference detection algorithm and flow chart oriented to part translation. The method is implemented in AeroAssem assembly design system. The method is proved to be effective and accurate by an example in assembly interference matrix generation. It can be widely used in design tasks such as assembly planning and simulation.
【作者單位】： 東北大學機械工程與自動化學院;中國人民解放軍駐沈陽黎明航空發動機公司軍事代表室;東北大學流程工業綜合自動化國家重點實驗室;
【基金】：國家自然科學基金資助項目(51305074,51305073) 中央高校基本科研業務費資助項目(N120408001)~~
【分類號】：TG95

【參考文獻】

相關期刊論文 前5條

1 王成恩;于宏;于嘉鵬;張聞雷;袁輝;;復雜產品裝配規劃系統[J];計算機集成制造系統;2011年05期

2 江洪;侯劍波;丁家翔;周孔亢;;干涉檢驗優化算法及其在車輛電磁制動器虛擬裝配系統中的實現[J];機械工程學報;2007年12期

3 張聞雷;王成恩;于嘉鵬;馮國奇;袁輝;;面向中小企業裝配設計系統的產品裝配模型[J];計算機集成制造系統;2013年03期

4 劉檢華,姚s，

本文編號：1662877