本文選題：Al2O3陶瓷　切入點：Ag72Cu28　出處：《浙江工業大學》2015年碩士論文　論文類型：學位論文

【摘要】：Al2O3陶瓷材料具有耐磨損,耐腐蝕,耐高溫等性能,在工業領域中具有廣泛應用。由于制造形狀復雜或大尺寸的零件的需要,實現其連接常是Al2O3陶瓷在某些應用中的關鍵技術之一。本文以Ag72Cu28為釬料,在空氣爐中實現了95-Al2O3陶瓷的釬焊連接,分別研究了Ti O2和Cu O作為氧化物潤濕劑的助焊效果。研究表明:(1)當以Ti O2為釬焊助劑時,最佳工藝參數是:釬焊溫度1080℃,保溫時間10min,Ti O2含量5wt.%。得到的釬焊接頭剪切強度高達24.91MPa。接頭焊縫界面結合層的主要物相組成為Cu Al2O4、Ti O、Ti O2、Cu O、Cu3Ti O4。(2)當以Cu O為釬焊助劑時,最佳工藝參數是:釬焊溫度1050℃,保溫時間10min,Cu O含量10wt.%。得到的釬焊接頭剪切強度高達39.04MPa。接頭焊縫界面結合層的主要物相組成為Cu O和Cu Al2O4、Cu Al O2。(3)Ti O2與Cu O提高了Ag72Cu28共晶釬料對Al2O3陶瓷的浸潤能力。根據SEM、EDS、XRD等分析結果,結合相關熱力學原理,推導Ti O2或Cu O作為氧化物潤濕劑的界面反應機理。
[Abstract]:Al2O3 ceramic materials have been widely used in industry because of their wear resistance, corrosion resistance and high temperature resistance. In this paper, the brazing bonding of 95-Al _ 2O _ 3 ceramics in air furnace is realized by using Ag72Cu28 as solder, which is one of the key technologies in some applications of Al2O3 ceramics. The effect of TIO 2 and Cu O as oxide wetting agent was studied. The results show that when TIO 2 is used as brazing aid, the optimum process parameters are as follows: brazing temperature 1080 鈩，

本文編號：1608121