本文關鍵詞： 等離子 重疊熔敷涂層 磨損性能　出處：《焊接學報》2015年06期 　論文類型：期刊論文

【摘要】：由于材料的磨損性能與其組織關系密切,因此重疊熔敷涂層的制備方法對涂層磨損性能也有著重要影響.在前期試驗基礎上制得等離子一層、二層和三層重疊熔敷涂層,采用SEM等觀察了重疊熔敷涂層的顯微組織和磨損形貌,用半自動顯微硬度計進行硬度測試,用磨損試驗機測試計算了涂層的摩擦系數,并通過比較3種重疊熔敷涂層的組織和磨損性能,探討了重疊熔敷工藝對涂層磨損性能的影響,以指導涂層的制備工藝.結果表明,隨著重疊熔敷層數的增加,涂層摩擦系數降低,耐磨性能和載荷特性顯著提高.
[Abstract]:Because the wear properties of the materials are closely related to their microstructure, the preparation method of the overlapped cladding coating also has an important influence on the wear properties of the coatings. On the basis of previous experiments, plasma one layer, two layers and three layers of overlapping cladding coatings have been prepared. The microstructure and wear morphology of the overlay coating were observed by SEM, the hardness was measured by semi-automatic microhardness tester, and the friction coefficient of the coating was calculated by wear testing machine. By comparing the microstructure and wear properties of three kinds of overlapped cladding coatings, the effects of overlapped cladding process on the wear properties of the coatings were discussed in order to guide the preparation process of the coatings. The results showed that with the increase of the number of overlapped cladding layers, The friction coefficient of the coating is reduced, and the wear resistance and load characteristics are improved significantly.
【作者單位】： 濰坊學院機電與車輛工程學院;
【基金】：山東省高等學�？萍加媱澷Y助項目(J12LA56)
【分類號】：TG174.4

【參考文獻】

相關期刊論文 前10條

1 向永華;徐濱士;呂耀輝;姜yN;劉存龍;夏丹;;微束等離子粉末熔覆金屬零件直接快速成形研究[J];中國表面工程;2009年04期

2 劉均海;黃繼華;劉均波;宋桂香;;等離子熔覆TiC/Fe-Cr金屬陶瓷復合涂層[J];焊接學報;2011年01期

3 劉均波;;等離子熔覆高鉻鐵基涂層的開裂行為與控制[J];焊接學報;2012年06期

4 陶，

本文編號：1518591