本文關鍵詞： 高速鋼 TiAlN涂層 退鍍液　出處：《硅酸鹽通報》2015年11期 　論文類型：期刊論文

【摘要】：本論文采用化學方法退除高速鋼(HSS)基體上的硬質涂層。采用金相顯微鏡和光電子能譜(XPS)分析了HSS基體涂覆涂層前和退除涂層后表面形貌和成分變化。發現鍍有Ti Al N涂層的HSS在35℃,1.52 mol葡萄酸鈉(GA)、30 mol 30%H_2O_2、0.45 mol三聚磷酸鈉(STPP)、13 mol Na OH組成的堿性退鍍液中反應80 min后,Ti Al N系涂層能被退除掉,且HSS基體表面光亮。通過對退鍍后基體表面XPS定性分析發現,基體表面Ti、Al元素含量為零,涂層退除干凈,溶液對基體腐蝕很小。
[Abstract]:In this paper, the hard coatings on high speed steel (HSS) substrates were removed by chemical method. The surface morphology and composition changes before and after coating on HSS substrates were analyzed by metallographic microscope and photoelectron spectroscopy (XPS). The HSS of Al-N coating can be removed by reaction of 80 min in the alkaline retreating bath composed of H _ 2O _ 2 and 0.45 mol sodium tripolyphosphate at 35 鈩，

本文編號：1516833