本文關鍵詞： 無縫藥芯焊絲 超低氫 低溫韌性 熱輸入　出處：《焊接學報》2015年12期 　論文類型：期刊論文

【摘要】：通過選擇鈦堿性渣系和Mn-Si-Ni-Ti-B合金系,在德國進口無縫藥芯焊絲生產線上,制成了一種超低氫高韌性的無縫藥芯焊絲TME711Ni SF.其焊接工藝性能和力學性能優良,對焊接熱輸入具有良好的適應性.為探討熔敷金屬的韌化機理,對配方中的脫氧劑和合金劑含量進行了優化設計.結果表明,Mn和Si元素含量居于優化水平時,焊縫組織主要是均勻細小的針狀鐵素體,這種組織的塑性和低溫韌性高,熔敷金屬在溫度-40℃沖擊吸收功可達到154 J.該無縫藥芯焊絲熔敷金屬的擴散氫含量為2.4 m L/100 g,達到了超低氫水平,適用于船舶、橋梁、海洋工程等重要結構的焊接.
[Abstract]:By selecting titanium basic slag system and Mn-Si-Ni-Ti-B alloy system, the seamless flux-cored wire production line was imported in Germany. A kind of seamless flux-cored wire (TME711Ni SFS) with ultra-low hydrogen and high toughness was made. The welding process and mechanical properties of the wire were excellent. It has good adaptability to welding heat input. In order to discuss the toughening mechanism of deposited metal, the content of deoxidizer and alloy agent in the formulation is optimized. The results show that. When the content of mn and Si is in the optimum level, the microstructure of the weld is mainly a fine and homogeneous acicular ferrite, which has high ductility and low temperature toughness. The impact absorption energy of the deposited metal at the temperature of -40 鈩，

本文編號：1457801