HIPIMS制備Cr-B涂層及摩擦學性能
發布時間:2018-01-17 17:01
本文關鍵詞:HIPIMS制備Cr-B涂層及摩擦學性能 出處:《中國表面工程》2015年06期 論文類型:期刊論文
更多相關文章: 高功率脈沖磁控濺射 Cr-B涂層 微結構 摩擦性能
【摘要】:為研究Cr-B涂層在多測試環境(干摩擦、蒸餾水和海水環境)下摩擦磨損行為,采用高功率脈沖磁控濺射沉積技術制備Cr-B涂層,分析涂層成分、結構、微觀形貌和力學性能,重點考察涂層在不同環境下的摩擦磨損性能。結果表明:制備的Cr-B涂層,B/Cr的原子比為1.8,結構主要由CrB2和自由Cr相組成,硬度和彈性模量分別為(26.9±1.0)GPa和(306.7±6.0)GPa。摩擦測試結果顯示:涂層在干摩擦?xí)r具有較高的摩擦因數為0.75,發生嚴重磨損失效,歸因于摩擦過程中涂層剝落而導致嚴重的磨粒磨損;與干摩擦相比,涂層在蒸餾水和海水環境中的摩擦因數均顯著降低,分別為0.26和0.22,這主要由于蒸餾水和海水的邊界潤滑作用所導致,在蒸餾水中摩擦的磨損機制為磨粒磨損,而在海水中的磨損機制為磨粒磨損和腐蝕磨損的協同作用。
[Abstract]:In order to study the friction and wear behavior of Cr-B coating under multi-test environment (dry friction, distilled water and seawater environment), the Cr-B coating was prepared by high power pulsed magnetron sputtering deposition and the composition of the coating was analyzed. The microstructure, microstructure and mechanical properties of the coatings were investigated in detail. The results showed that the atomic ratio of B / Cr in the prepared Cr-B coating was 1.8. The structure is mainly composed of CrB2 and free Cr phase. The hardness and modulus of elasticity are 26.9 鹵1.0GPA and 306.7 鹵6.0GPa.The friction test results show that the coating has a high friction coefficient of 0.75 under dry friction. The serious wear failure is attributed to the serious abrasive wear caused by the spalling of the coating during the friction process. Compared with dry friction, the friction coefficient of the coating in distilled water and seawater was significantly reduced to 0.26 and 0.22, respectively, which was mainly due to the boundary lubrication of distilled water and seawater. The wear mechanism of friction in distilled water is abrasive wear, while the wear mechanism in seawater is the synergism of abrasive wear and corrosion wear.
【作者單位】: 中北大學材料科學與工程學院;中國科學院寧波材料技術與工程研究所中國科學院海洋新材料與應用技術重點實驗室;中國科學院寧波材料技術與工程研究所浙江省海洋材料與防護技術重點實驗室;
【基金】:國家重點基礎研究發展計劃(973計劃)(2013CB632302) 寧波市重點科技項目(2014B10032) 寧波市國際合作項目(2014D10014)
【分類號】:TG174.444
【正文快照】: 引文格式:張樹參,柯培玲,李曉偉,等.HIPIMS制備Cr-B涂層及摩擦學性能[J].中國表面工程,2015,28(6):13-19.Zhang S C,Ke P L,Li X W,et al.Tribological property of Cr-B coatings prepared by HIPIMS technique[J].China Surface Engineer-ing,2015,28(6):13-19.0引言隨著海
【相似文獻】
相關期刊論文 前1條
1 趙月強;蘭亮云;李燦明;趙德文;;微釩Cr-B系NM400耐磨鋼的熱處理工藝[J];鋼鐵;2013年01期
,本文編號:1437125
本文鏈接:http://sikaile.net/kejilunwen/jinshugongy/1437125.html
最近更新
教材專著