本文關鍵詞：基于HyperXtrude的ZK60鎂合金型材擠壓成形數值模擬和實驗驗證　出處：《鍛壓技術》2015年06期 　論文類型：期刊論文

  更多相關文章： ZK鎂合金型材 擠壓成形 有限元模擬 金屬流動 焊合

【摘要】：應用Hyper Xtrude軟件對ZK60鎂合金空心型材的擠壓成形過程進行了有限元數值模擬研究,分別得到了型材在穩態擠壓下的溫度場、速度場、應變場和位移場,分析了金屬流動情況、焊合室入口和出口處的壓力。通過不同擠壓速度下的穩態模擬分析,確定了合適的型材擠壓速度為10 mm·s-1。在擠壓溫度為350℃和擠壓速度為10 mm·s-1條件下進行實驗驗證,得到了形狀外觀均合格的產品。對比分析發現,模擬結果與實驗結果的型材斷面宏觀組織形貌具有一致性,證明了應用Hyper Xtrude軟件可以有效預測鎂合金型材成形過程中的金屬流動和焊合情況。
[Abstract]:The finite element numerical simulation of the extrusion process of ZK60 magnesium alloy hollow profile was carried out by using Hyper Xtrude software. The temperature field and velocity field of the profile under steady extrusion were obtained respectively. The metal flow, the pressure at the entrance and outlet of the welding chamber, and the steady state simulation analysis under different extrusion velocities are analyzed by the strain field and displacement field. The suitable extrusion speed was determined to be 10 mm 路s-1.Extrusion temperature was 350 鈩，

本文編號：1435088