本文關鍵詞：動力電池組焊接機控制系統研制　出處：《長春理工大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 動力電池組 焊接 工控機 運動控制卡 控制系統

【摘要】：針對企業實際生產中對電動汽車動力鋰離子電池組焊接自動化的需求,本文設計研制了一種基于工業PC的電池組焊接機運動控制系統。本文闡述了電阻點焊原理和焊接機工作過程,提出了控制系統設計要求。根據要求,選用“PC+運動控制卡”輔助以數字量輸入輸出卡作為最終控制系統方案。對系統中所需硬件做出相關介紹,分析主要硬件工作原理。使用Visual Basic程序設計語言制作控制系統人機界面,調用運動控制卡的運動控制函數完成控制系統軟件設計,給出部分軟件編程代碼。為保障控制系統正常運行,對控制系統進行抗干擾設計。最后對系統進行調試并給出調試結果。本文對實現動力電池組的自動焊接具有一定的理論和實用價值。
[Abstract]:According to the welding automation of electric vehicle lithium ion battery in the actual production needs of enterprises, this paper designed and developed a welding machine based on motion control system of PC battery industry. This paper expounds the principle of resistance spot welding and welding machine working process, put forward the design requirements of control system. According to the requirements of the "PC+ motion control card" auxiliary input to digital output card as the final control system. To make the relevant introduction to the required system hardware, analysis of the main hardware working principle. Using Visual Basic programming language production control system interface, called motion control card motion control function to complete the software design of the control system, software programming code is given. Ensure normal operation of control system, the design of anti - interference to the control system. Finally the system is tested and the test results are given. The real The automatic welding of the current power battery pack has some theoretical and practical value.

【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TG43

【參考文獻】

相關期刊論文 前2條

1 高波;張曉桂;;基于運動控制卡的給紙實驗裝置控制系統設計[J];北京印刷學院學報;2009年04期

2 ;Research on technology of automatic welding machine and procedure for pile pipes of offshore jacket platform[J];Engineering Sciences;2010年02期

相關碩士學位論文 前1條

1 靳亞平;基于微機的數控系統配套軟件設計及研究[D];合肥工業大學;2006年

，

本文編號：1404899