發布時間：2018-07-31 11:56

【摘要】：預應力混凝土連續梁橋具有整體性能良好、抵抗變形和地震能力強、變形縫設置少、車輛顛簸程度小、成橋后人力物力財力投入少,而且整體外形美觀等諸多優點,在當今橋梁工程應用越來越普遍,成為經典的梁式結構�？茖W(xué)的施工控制和合理的結構設計在保障橋梁結構施工安全和質量方面共同發揮重要作用。在施工控制過程中采集到現場監測數據,為連續梁的各施工工序提供準確可信的數據,從而保證施工過程中的梁體安全和質量以及人員安全。 本文在某預應力連續梁橋各施工階段施工方法、施工組織進行詳細分析基礎上,對制定施工控制流程,監測內容、監測點位置選擇、監測時間點等進行較全面研究。在施工控制過程中采用高精度電子水準儀來量測連續梁梁頂標高,采用混凝土應變計和讀數儀來采集連續梁內的混凝土應力。嚴格按照國家標準和工藝流程要求采集數據,獲取了大量監測數據。最后對標高和應力數據進行分析,給出各節段的施工控制數據。 結果表明：采集方法符合相關規程,讀數準確；施工控制數據精確度較高,連續梁各測點實測標高與計算標高之間的誤差在規范要求范圍里；連續梁應力也未超過混凝土設計強度,張拉均勻。為保證橋梁正常施工和施工質量,提供了參考依據。
[Abstract]:The prestressed concrete continuous beam bridge has many advantages, such as good overall performance, strong resistance to deformation and earthquake, less setting of deformation joints, small bumpy degree of vehicles, less investment of manpower, material and financial resources after completion of the bridge, and beautiful overall appearance, etc. Nowadays, the application of bridge engineering is becoming more and more common, becoming the classical beam structure. Scientific construction control and reasonable structural design play an important role in ensuring the safety and quality of bridge construction. The monitoring data are collected in the construction control process to provide accurate and reliable data for the construction process of continuous beam, so as to ensure the safety and quality of the beam and the safety of the personnel during the construction process. On the basis of detailed analysis of construction methods and construction organization of a prestressed continuous girder bridge in each construction stage, this paper makes a comprehensive study on the establishment of construction control flow, monitoring contents, location selection of monitoring points, monitoring time points, and so on. In the construction control process, the high precision electronic level is used to measure the top height of the continuous beam, and the concrete strain gauge and reading meter are used to collect the concrete stress in the continuous beam. Strict accordance with national standards and process requirements to collect data, access to a large number of monitoring data. Finally, the data of elevation and stress are analyzed, and the construction control data of each section are given. The results show that the collection method accords with the relevant regulations, the reading is accurate, the accuracy of construction control data is high, and the error between the measured and calculated elevation of each measuring point of continuous beam is within the required range of the specification. The stress of continuous beam does not exceed the design strength of concrete, and the tension is even. In order to guarantee the normal construction and construction quality of the bridge, the reference basis is provided.
【學位授予單位】：大連交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：U445.4

【相似文獻】

相關期刊論文 前10條

1 姚昌榮;姚山毛;李亞東;;神經網絡參數識別技術在施工控制中的應用[J];四川建筑;2007年03期

2 文武松;;蘇通大橋輔橋連續剛構施工控制[J];橋梁建設;2008年04期

3 阮有力;;施工企業對預應力混凝土連續梁橋進行施工控制的探討[J];公路交通科技(應用技術版);2008年08期

4 呂江;呂r，

本文編號：2155512