本文選題：道路工程 + 水泥混凝土��； 參考：《河北工業大學》2014年碩士論文

【摘要】：水泥混凝土路面的不斷發展，帶動社會經濟發展的同時，也使越來越多的人對水泥混凝土有了更深的接觸與認識，從而使得水泥混凝土家喻戶曉，風靡全球。在輝煌籠罩的光環下，人們對水泥混凝土路面的使用性能提出了更高的要求，耐久性和長期穩定性已成為現代水泥混凝土路面修筑的基本目標�；炷谅访媸褂眯阅艿奶嵘�，有賴于拌合過程的質量控制。為此，針對水泥混凝土拌合過程中定量化品質管理的問題，展開以下幾方面的研究。 1、在試驗室內，運用加裝有扭矩傳感器的小型雙臥軸攪拌機，實現了對扭矩、攪拌時間的實時采集與存儲。分析了攪拌時間以及攪拌速度對骨料拌合過程質量的影響，確定了骨料拌合均勻的最佳攪拌時間，建立了骨料拌合均勻與單位體積中各檔骨料重量相對誤差之間的關系，建立了骨料拌合均勻與扭矩之間的關系，同時建立了拌合過程中骨料級配變化與攪拌時間之間的關系，為水泥混凝土拌合過程中的定量化品質管理研究提供了研究思路以及物質基礎。 2、在試驗室內，，運用加裝有扭矩傳感器的小型雙臥軸攪拌機，實現了對扭矩、攪拌時間的實時采集與存儲。分析了攪拌時間以及攪拌速度對水泥混凝土拌合過程質量的影響，確定了間斷級配混凝土和連續級配混凝土的最佳拌合時間，確定了混凝土最佳的投料順序，建立了混凝土拌合均勻與單位體積中各檔骨料重量相對誤差之間的關系，建立了混凝土拌合均勻與抗壓強度值之間的關系，同時建立了混凝土拌合均勻與扭矩之間的關系，實現在線實時監控水泥混凝土的拌合質量。 3、在試驗室內，運用小型雙臥軸攪拌機。系統的分析了骨料含水率對水泥混凝土拌合質量的影響，確定了骨料含水率對不同標號混凝土的抗壓強度值與抗折強度值均有較大影響，得出標養7天時混凝土的最大抗壓強度值與最大抗折強度值與實際有一定的偏差，對于造成偏差的具體原因需進一步的研究。
[Abstract]:With the continuous development of cement concrete pavement and the development of social economy, more and more people have a deeper contact and understanding of cement concrete, which makes cement concrete become a household name and become popular all over the world. Under the brilliance shrouded in the aura, people put forward higher requirements to the performance of cement concrete pavement, durability and long-term stability have become the basic goal of modern cement concrete pavement construction. The improvement of the performance of concrete pavement depends on the quality control of mixing process. Therefore, aiming at the problem of quantitative quality management in cement concrete mixing process, the following aspects are studied. 1. In the test room, the torque is realized by using a small double horizontal shaft mixer equipped with torque sensor. Real-time collection and storage of stirring time. The effects of mixing time and stirring speed on the quality of aggregate mixing process are analyzed. The optimum mixing time of aggregate mixing uniformity is determined, and the relationship between aggregate mixing uniformity and relative error of aggregate weight per unit volume is established. The relationship between aggregate mixing uniformity and torque, and the relationship between aggregate gradation and mixing time were established. It provides the research idea and material basis for the quantitative quality management research in cement concrete mixing process. 2. In the test room, the torque is realized by using a small double horizontal shaft mixer with torque sensor. Real-time collection and storage of stirring time. The influence of mixing time and mixing speed on the quality of cement concrete mixing process is analyzed. The optimum mixing time of discontinuous graded concrete and continuous graded concrete is determined, and the best feeding sequence of concrete is determined. The relation between concrete mixing uniformity and the relative error of aggregate weight per unit volume, the relation between concrete mixing uniformity and compressive strength, and the relationship between concrete mixing uniformity and torque are established. Realize on-line real-time monitoring of cement concrete mixing quality. 3, in the test room, the use of small double horizontal shafts mixer. The effect of aggregate moisture content on cement concrete mixing quality is analyzed systematically. It is determined that aggregate moisture content has great influence on compressive strength and flexural strength of concrete of different grades. It is concluded that the maximum compressive strength and the maximum flexural strength of concrete after 7 days of standard maintenance are deviated from the actual conditions, and the concrete causes of the deviation need to be further studied.
【學位授予單位】：河北工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：U414;U416.216

【參考文獻】

相關期刊論文 前9條

1 邢鋒,冷發光,馮乃謙,李偉文;高性能混凝土骨料數量效應研究[J];四川建筑科學研究;2001年02期

2 黃德和;;砂、石含水量對混凝土強度影響分析與控制[J];安徽建筑;2007年01期

3 任峰;趙尚傳;;粗集料礦粉吸附對混凝土性能影響的試驗研究[J];公路交通科技(應用技術版);2007年10期

4 彭勇;孫立軍;;瀝青混合料路面離析原因研究[J];公路交通科技;2007年05期

5 陳家瓏,方源興;我國混凝土骨料的現狀與問題[J];建筑技術;2005年01期

6 吳慧敏;;瀝青混合料的離析原因及施工技巧淺析[J];科技信息(科學教研);2007年19期

7 裘行潔;;攪拌功率與稠度關系的探討[J];混凝土及加筋混凝土;1985年02期

8 魏忠義;;攪拌功率與稠度之間的關系[J];混凝土及加筋混凝土;1986年05期

9 唐建華;;混凝土的攪拌對混凝土強度的影響[J];瀘天化科技;2010年02期

本文編號：2086882