本文選題：道路工程 + SBS改性瀝青��； 參考：《長安大學學報(自然科學版)》2014年03期

【摘要】：為更合理控制SBS改性瀝青的質量性能,選取不同的剪切時間、剪切溫度和發育時間,對3種不同的SBS改性瀝青進行改性加工;應用瀝青試驗方法與熒光顯微觀測技術,對其感溫性、高溫性能、低溫性能,以及改性瀝青的微觀分散狀態進行了分析研究。研究結果表明:對與瀝青相容性較好且相對分子質量較大的SBS,加工工藝參數推薦剪切時間90min,剪切溫度180℃,發育時間2h;對與瀝青相容性較差且相對分子質量較小的SBS,加工工藝參數推薦剪切時間60min,剪切溫度170℃,發育時間不宜大于4h。結合研究結果對現場膠體磨的加工工藝參數進行了優化,能保證現場生產的SBS改性瀝青的質量要求。
[Abstract]:In order to control the quality of SBS modified asphalt more reasonably, three kinds of SBS modified asphalt were modified and processed with different shear time, shear temperature and development time. The temperature sensitivity, high temperature performance, low temperature performance and micro dispersion state of modified asphalt were studied. The results show that for SBS with good compatibility with asphalt and relatively high molecular weight, the processing process parameters recommend shear time of 90 min and shear temperature of 180 鈩，

本文編號：2060927