CrN/（Ti,Al,Zr,Cr） N bilayer films were successfully deposited on cemented carbide（ WC-8% Co） substrates by multi-arc ion plating process using two Ti-Al-Zr alloy targets and one pure Cr target. As a result of bilayered structure and addition of alloying elements（ e. g. Al and Cr）,the films exhibited excellent high temperature oxidation resistance under both short-term isothermal（ up to 800 ℃） and long-term cyclic（ up to 600 ℃） exposure conditions. Combined with pre-established outstanding tribol... 

【文章來源】：Journal of Iron and Steel Research（International）. 2017,24(03)EISCICSCD

【文章頁數(shù)】：7 頁

【文章目錄】：
1. Introduction
2. Experimental Procedure
    2.1. Substrate preparation
    2.2. Film deposition process
    2.3. High temperature oxidation tests
3. Results and Discussion
    3.1. Film characterization
        3.1.1. Composition
        3.1.2. Cross-sectional film morphology and microstruc-ture
    3.2. Short-term oxidation
        3.2.1. Tint evolution
        3.2.2. Mass gain
        3.2.3. Oxide scales and XRD patterns
    3.3. Long-term cyclic oxidation
        3.3.1. Cyclic oxidation kinetics
        3.3.2. Oxide scales and XRD patterns
4. Conclusions



本文編號：3298870