發布時間：2020-12-31 18:11

　　計算機數控（CNC）加工已被認為是能夠生產具有高精度和可靠質量的制造工藝,并在低成本的高質量供應在制造業中起著至關重要的作用,也適用于用于加工零件的切削工具的制造。整體立銑刀是機械加工中最常用的切削刀具之一,用于復雜形狀表面的加工。為了提高生產效率,必須組織高質量和快速生產的切削刀具,包括整體銑刀。立銑刀通過許多參數定義,如直徑、螺旋角、后角、前角、齒數等。這些參數必須確保了切削過程的切屑流動和加工后工件所需的表面質量。要做到這一點,必須開發滿足這些高要求的軟件,具有良好的界面并且易于使用。在我的研究工作中,選擇了整體立銑刀,開發的軟件考慮了整體銑刀的幾何特征,使其更容易制造。首先,查閱了該領域的研究現狀,包括國內外許多研究人員的研究論文和科學著作,總結整理了定義整體立銑刀的基本幾何參數。整體立銑刀其參數結構設計含義:為了保持整體立銑刀圓周切削刃、螺旋槽、端刃和排屑槽的基本結構之間的相對位置關系、刀刃的長度、直徑,重要幾何參數如螺旋槽、刀刃的前后角和螺旋角在數學上被參數化,使得它們可以在有限的范圍內調整。刀具的前角影響加工中的切削力,容屑槽的形狀和尺寸決定了刀具的剛性和切屑排出能力,并... 

【文章來源】：哈爾濱工業大學黑龍江省 211工程院校 985工程院校

【文章頁數】：74 頁

【學位級別】：碩士

【文章目錄】：
摘要
Abstract
Chapter 1 Introduction
    1.1 The source of the topic and the background, purpose and significance ofthesis
        1.1.1 The source of the topic and the background
        1.1.2 The purpose and significance of the research
    1.2 Domestic and foreign research status and analysis of the research
        1.2.1 Situation Study abroad
        1.2.2 Domestic research situation
        1.2.3 Brief analysis of literature review
    1.3 Main research contents
Chapter 2 Establishment of Mathematical Model of Integral Milling Cutter ..13
    2.1 Determination of the basic parameters of the integral milling cutter andgrinding wheel
        2.1.1 Basic geometric parameters of the integral milling cutter
        2.1.2 Grinding wheel selection
    2.2 Investigation of the production of helical flute and milling side edge andmathematical modeling
        2.2.1 Helical flute grinding modeling
        2.2.2 Grinding modeling of side edge flank
        2.2.3 Modeling of grinding trajectory of rake and flank flange of end edge
    2.3 Chapter summary
Chapter 3 Generation of the mathematical model
    3.1 Functional analysis and overall design of CNC programming software
        3.1.1 Integral end mill parameterization programming
        3.1.2 Overall flute process method and programming
        3.1.3 Cylindrical grinding process and programming
        3.1.4 End face grinding
        3.1.5 Rake end grinding
    3.2 Post processing of tool position data
    3.3 The realization of NC software for CNC in Microsoft Visual C++
        3.3.1 The overall design of the software
        3.3.2 Tool management module
        3.3.3 Grinding wheel management modules
        3.3.4 Process Design
    3.4 Chapter summary
Chapter 4 Simulation verification based on VERICUT
    4.1 Automatic programming combined with software interface
    4.2 VERICUT Introduction
    4.3 CNC grinding simulation process based on VERICUT
        4.3.1 Project tree
        4.3.2 Tool library creation
        4.3.3 Simulation example
    4.4 Simulation result comparison
    4.5 Chapter summary
Conclusion
References
Acknowledgements
Resume


【參考文獻】：
期刊論文
[1]基于UG的加工仿真及后置處理器的開發[J]. 周立波,李厚佳.  制造業自動化. 2009(02)
[2]等導程回轉刀具虛擬實境的通用模型及其應用[J]. 丁秀娟,邵成林,唐余勇.  佳木斯大學學報(自然科學版). 2002(02)
[3]螺旋角的廣義定義及其應用[J]. 龔智輝,賓鴻贊.  中國機械工程. 1994(01)



本文編號：2950080