【摘要】：采用EBSD技術觀察了不同變形量高純鎳三叉晶界的退火行為。結果表明,在退火初期,部分三叉晶界處形成尺寸較小的晶核且與基體呈孿晶關系。在進一步退火過程中,這些晶核中的大部分被其它快速長大的晶粒所吞并。軋制變形量為5%和10%時,長大晶粒是樣品中的原有晶粒,它們通過形變誘發晶界遷移的方式快速長大,并在長大過程中激發出大量Σ3n(n=1,2,3…)等重位點陣晶界。變形量為20%時,長大晶粒是退火初期形成的尺寸較大的再結晶晶粒,它消耗周?chē)巫兘M織并快速長大,在長大過程中也激發出大量Σ3n(n=1,2,3…)等重位點陣晶界。
[Abstract]:The annealing behavior of trigeminal grain boundaries of high purity nickel with different deformation was observed by EBSD technique. The results show that at the initial stage of annealing, some trigeminal nuclei with smaller size and twinning relation with the matrix are formed at the trigeminal boundary. During further annealing, most of these nuclei are absorbed by other rapidly growing grains. When the rolling deformation is 5% and 10%, the grown-up grains are the original grains in the sample. They grow up rapidly by deformation-induced grain boundary migration and excite a large amount of 危 3n (n = 1, 2, 3 鈥，

本文編號：2467842