【摘要】：研究了熱輥軋制中AZ31B鎂合金不同工藝條件下厚度方向溫度分布及其與組織的關系,并在此基礎上建立了能量守恒的簡化方程來預測溫升。結果表明:變形過程中各層金屬的溫升均與壓下率正相關,而與初軋溫度反相關。輥溫顯著影響軋制時的表面溫降和總體溫升,使得熱輥軋制表層組織中孿晶明顯減小,軋板中再結晶更加充分。此外,基于能量守恒的簡化方程的計算結果與實測數據吻合較好。
[Abstract]:The temperature distribution in thickness direction of AZ31B magnesium alloy in hot roll rolling process and its relationship with microstructure were studied. On the basis of this, a simplified equation of energy conservation was established to predict the temperature rise. The results show that the temperature rise of each layer in the deformation process is positively correlated with the reduction rate, but inversely correlated with the initial rolling temperature. The temperature of roll significantly affects the surface temperature drop and the overall temperature rise during rolling, which makes the twin in the surface structure of hot roll decrease obviously, and the recrystallization is more abundant in the rolling plate. In addition, the calculated results of the simplified equation based on the conservation of energy are in good agreement with the measured data.
【作者單位】： 東北大學材料電磁過程研究教育部重點實驗室;
【基金】：國家“973”計劃資助項目(2013CB632203) 遼寧省自然科學基金資助項目(2014028027) 中央高�；究蒲袠I(yè)務費專項資金(N120509002,N120309003)
【分類號】：TG339

【相似文獻】

相關期刊論文 前5條

1 王文平;萬敏;吳向東;刁可山;;汽車板單向拉伸過程中變形熱實驗研究及有限元分析[J];塑性工程學報;2009年05期

2 王宇 ,凌國平;國外少變形熱處理技術現狀[J];國外金屬熱處理;2004年03期

3 王榮濱,信純;Cr12MoV鋼熱壓精密塑料模微變形熱處理[J];熱加工工藝;1992年04期

4 王君坦;;卡規的微變形熱處理[J];機械工人;1984年09期

5 趙娜;楊延清;韓明;羅賢;馮廣海;張榮軍;;2024鋁合金限制膨脹變形熱處理產生高壓的有限元分析(英文)[J];Transactions of Nonferrous Metals Society of China;2012年09期

，

本文編號：2449848