【摘要】：對鑄態AZ91鎂合金板進行了三種不同冷卻條件下的多道次攪拌摩擦加工,即兩次空氣、一次空氣和一次水下、兩次水下的攪拌摩擦加工,并對其組織和力學性能進行了研究。研究結果表明:在多道次攪拌摩擦加工過程中,劇烈的塑性變形使攪拌區內呈網狀的第二相β-Mg17Al12顯著破碎變成細小顆粒狀,攪拌區的微觀組織均得到了顯著細化,三種不同冷卻條件下樣品的平均晶粒尺寸分別為5.8μm,1.4μm和0.8~1μm;兩次水下加工的組織更為細小,其顯微硬度、抗拉強度和延伸率較其他兩種冷卻條件下多道次攪拌摩擦加工樣品的高,分別為94.7 HV,355.5 MPa和31.5%。
[Abstract]:In this paper, as cast AZ91 magnesium alloy plates were processed by friction stir under three different cooling conditions, namely, two air, one underwater and two underwater friction stir, and the microstructure and mechanical properties were studied. The results show that during the multi-pass friction stir process, the second phase 尾-Mg17Al12, which is reticulated, is broken into fine particles, and the microstructure of the stir zone is refined by the severe plastic deformation, and the results are as follows: (1) during the process of multi-pass friction stir processing, the second phase 尾-Mg17Al12 in the stirring zone is obviously broken into fine particles. The average grain sizes of the samples under three different cooling conditions are 5.8 渭 m, 1.4 渭 m and 0.8 渭 m, respectively. The microhardness, tensile strength and elongation of the two processes were higher than those of the other two kinds of cooling conditions (94.7 HV,355.5 MPa and 31.5 HV,355.5 MPa, respectively).
【作者單位】： 華南理工大學國家金屬材料近凈成形工程技術研究中心;
【基金】：中央高�；鹂蒲袠I(yè)務費專項資金資助項目(20142G0028)
【分類號】：TG146.22

【相似文獻】

相關期刊論文 前10條

1 ;力學性能二級人員取證復習參考題(之一)解答[J];理化檢驗(物理分冊);1997年12期

2 ;力學性能二級人員取證復習參考題(之三)解答[J];理化檢驗(物理分冊);1998年04期

3 陳金寶;高溫力學性能二級人員取證復習參考題(持久部分之五)解答[J];理化檢驗(物理分冊);2000年02期

4 潘葉金;電弧熔鑄的Nb-18Si-5Mo-5Hf-2C復合材料的力學性能[J];中國鉬業;2003年03期

5 張美忠,李賀軍,李克智;三維編織復合材料的力學性能研究現狀[J];材料工程;2004年02期

6 游宇,周新貴;三維編織復合材料的力學性能[J];纖維復合材料;2004年04期

7 羅文波;唐欣;譚江華;趙榮國;;流變材料長期力學性能加速表征的若干進展[J];材料導報;2007年07期

8 嚴振宇;徐強;朱時珍;劉穎;;Sm_2Zr_2O_7-ZrB_2/SiC復合材料的制備及力學性能研究[J];稀有金屬材料與工程;2011年S1期

9 瞿欣;孫汝n，

本文編號：2430182