【摘要】：7A85鋁合金密度小、強度高、熱加工性能好、焊接性能優良,而且具有較好的耐腐蝕性和較高的韌性,廣泛應用于航空和航天中的受力結構件.本文通過擠壓態7A85鋁合金的單向等溫熱壓縮實驗,利用光學顯微鏡、透射電鏡研究了合金在變形溫度為300℃,350℃,400℃,450℃,應變速率為0.01s~(-1),0.1s~(-1),1s-1,10s~(-1)時的高溫流變行為和顯微組織演變.結果表明:變形溫度和應變速率對擠壓態7A85鋁合金熱壓縮后的組織有重要影響.隨著變形溫度的升高和應變速率的降低(lnZ減小),組織中亞晶長大,位錯密度逐漸降低,析出相數量減少,再結晶晶粒長大,動態軟化機制由動態回復轉變?yōu)閯討B(tài)再結晶;擠壓態7A85鋁合金熱壓縮后組織中大量的析出相彌散分布在基體內或沿晶界分布,抑制了動態再結晶的發生.
[Abstract]:7A85 aluminum alloy has the advantages of low density, high strength, good hot working property, good welding property, good corrosion resistance and high toughness, so it is widely used in aeronautics and spaceflight. In this paper, the unidirectional isothermal compression experiment of extruded 7A85 aluminum alloy was carried out. The deformation temperature of the alloy was 300 鈩，

本文編號：2417257