發布時間：2018-10-12 06:32

【摘要】：受自然界中超疏水現象的啟發,本文設計了溝槽形和方柱形兩種疏水復合微結構模型,利用高速電火花線切割加工技術對設計的微結構進行制備,對制備的試樣表面的尺寸、形貌、潤濕性以及潤濕機理進行了觀測和分析,并對不同潤濕性能的試樣表面進行了抗冰霜試驗。研究發現,在鋁合金、黃銅表面可實現所設計的溝槽形和方柱形復合微結構形貌和尺寸的構建;潤濕機理結果顯示,水滴在已加工表面的接觸狀態是由亞毫米級溝槽/方柱及其表面分布的微米或納米級別的復合結構共同作用的結果。穩定性試驗結果表明,所制備的微結構表面具有較好的機械穩定性和外界環境穩定性。在恒溫恒濕條件下,試樣表面的潤濕性較為穩定,可一旦外界的溫度和濕度發生較大變化時,由于水滴的變形導致其在試樣表面的接觸狀態即材料表面的潤濕性能發生變化�？贡囼�(yàn)結果表明,材料表面的潤濕性是影響抗冰霜效果的主要因素。其原因是由于構建的微結構會增加基體表面的表觀接觸角,減小固液接觸面積,從而延緩過冷度的增加速度,使微結構表面具備一定的抗冰霜效果。
[Abstract]:Inspired by the superhydrophobic phenomena in nature, two hydrophobic composite microstructures, grooves and square columns, were designed in this paper. The designed microstructures were prepared by high speed WEDM, and the surface sizes of the samples were obtained. The morphology, wettability and wetting mechanism were observed and analyzed. It is found that the surface of aluminum alloy and brass can realize the shape and size of the groove and square composite microstructures, and the wetting mechanism shows that, The contact state of water droplets on the machined surface is the result of the interaction of sub-millimeter grooves / square columns and their surface distributed micro- or nanoscale composite structures. The results of stability test show that the microstructural surface has good mechanical stability and environmental stability. Under the condition of constant temperature and humidity, the wettability of the sample surface is relatively stable. However, once the temperature and humidity of the sample change greatly, the contact state of the sample surface, that is, the wettability of the material surface, changes due to the deformation of the water droplet. The results show that the wettability of the material surface is the main factor affecting the frost resistance. The reason is that the microstructure can increase the apparent contact angle of the matrix surface, reduce the solid-liquid contact area, so as to delay the increase of the supercooling rate and make the microstructure surface have a certain anti-frost effect.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TG174.4

【參考文獻】

相關期刊論文 前10條

1 龍江游;吳穎超;龔鼎為;范培迅;江大發;張紅軍;鐘敏霖;;飛秒激光制備超疏水銅表面及其抗結冰性能[J];中國激光;2015年07期

2 范永康;劉曉芳;白康;魏銘;;防冰融冰型涂料的研究進展[J];化工新型材料;2014年05期

3 丁云飛;殷帥;廖云丹;吳會軍;;納微結構疏水表面結霜過程及抑霜特性[J];化工學報;2012年10期

4 羅茜;王亞莉;;飛機結冰對于飛行安全的重大危害分析[J];科技視界;2012年20期

5 劉天慶;孫瑋;孫相_g;艾宏儒;;超疏水表面上冷凝液滴發生彈跳的機制與條件分析[J];物理化學學報;2012年05期

6 徐文驥;宋金龍;孫晶;竇慶樂;;鋁基體超疏水表面結冰結霜特性研究[J];制冷學報;2011年04期

7 劉中良;黃玲艷;勾昱君;劉耀民;;結霜現象及抑霜技術的研究進展[J];制冷學報;2010年04期

8 張友法;余新泉;周荃卉;李康寧;;超疏水低粘著銅表面制備及其防覆冰性能[J];物理化學學報;2010年05期

9 李再華;白曉民;周子冠;胡志軍;許婧;李曉s，

本文編號：2265132